Owner's Manual

Page 5
Globe Slicer Safety Tips
SHARP KNIFE BLADE
TO AVOID SERIOUS PERSONAL INJURY:
• NEVER touch this slicer without training and authorization from your supervisor or if you are under 18
years old. Read this instruction manual rst.
• ONLY install the slicer on a level nonskid surface that is nonammable and is located in a clean, well-lit
work area away from children and visitors.
• ALWAYS ground slicer utilizing proper power source.
• NEVER TOUCH KNIFE. Keep hands and arms away from all moving parts.
• NEVER OPERATE slicer without knife cover, knife sharpener and knife ring guard securely installed.
• BEFORE TURNING SLICER ON, place auto engage lever in “Manual” position (G12A only).
• BE ALERT. The food chute moves back and forth during automatic operation and can move in either
direction on start up (G12A only).
• NEVER HOLD THE FOOD PRODUCT WHILE SLICING. Hold only the end weight handle to slice.
• DO NOT CATCH SLICES WITH YOUR HAND. Let slices drop onto the receiving area.
• ALWAYS turn slicer off, return auto engage lever to “Manual” position (G12A only) and turn the slice
thickness dial clockwise until it stops after each use.
• BEFORE CLEANING, SHARPENING, SERVICING, OR REMOVING ANY PARTS always turn slicer off,
turn the slice thickness dial clockwise until it stops, remove food chute and unplug power cord.
• ALWAYS properly clean and sanitize your slicer. To prevent illness or death caused by the spread of
food-borne pathogens, it is important to properly clean and sanitize the entire slicer as any surface of the
slicer can become contaminated. It is the responsibility of the slicer owner/operator to follow all guide-
lines, instructions and laws as established by your local and state health departments and the manufac-
turers of chemical sanitizers.
• USE ONLY GLOBE SLICER ACCESSORIES properly installed.