User's Guide

For retrofit applications.
1. Remove the existing wall plate and screws from the wall after having
turned off the power at the circuit breaker and tested
the outlet with a voltage tester.
2. Remove the existing switch from the wall and label the wires
with the appropriate stickers included in the box.
1. Insert the On/Off switch into the switch box. DO not pinch any wires and
ensure they are arranged neatly.
2. Ensure the On/Off switch has the “Up” marking facing up and attached
to the switch box with the 2 screws (M).
3. Place the back piece over the On/Off switch and secure with the 2
screws (N).
4. With the “top” marking facing up, snap on the screwless faceplate on
the On/Off switch.
.
2 SMART SWITCHES
NOTE: to produce a functional 3-way connection, both smart switches
need to be the same brand. This switch is not compatible with other
brands.
1. Connect Ground (Green, A) wire of both switches to the Ground (green)
wire from the breaker box.
2. Connect the Line (Black, D) wire of both switches to the Line (Black) wire
from the breaker box.
3. Connect the Neutral (White, B) wire on the switch 2 and the Neutral (white)
wire coming from the light to the Neutral (White) wire from the breaker box.
4. Connect the Neutral (White, B) wire on the switch 1 to the Neutral (white)
wire coming from the breaker box.
5. Connect the Load (Red, E) wire on the switch 2 to the Load (red) wire from
the light
6. Connect the Traveler (Brown, C) wire on the switch 2 to the Traveler
(brown) of the switch 1.
7. Ensure the included wire nuts are securely fastened to each wire.
8. Restore power at the circuit breaker switch to test if the switch works.
9. Insert the new switch into the wall. Cover with the wall plate and screws
provided.
Smart Switch #1
i. Line (black)
ii. Ground (green, or yellow/green)
iii. Neutral (white)
iv. Traveler (Brown)

i. Line (black)
ii. Ground (green, or yellow/green)
iii. Neutral (white) x2
iv. Load (red)
v. Traveler (Brown)
INSTALL WALL PLATE
1
2