User's Guide
INSTRUCTIONS DE CONNEXION
This Smart Switch is warranted to last 1 year from the date of purchase. If it fails before that time, we will replace it. Send Globe Electric the
Smart Switch, proof of purchase and register receipt along with your complete name and address. See caution text for proper use. This
warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential
damage is expressly excluded.
For use only in 120V/60HZ circuits. Risk of electrical shock. Do not open, no user-serviceable parts inside. This device is not intended for use
with emergency exit fixtures or emergency exit lights, photocells and electronic timers. Do not use where directly exposed to water. If this
situation is undesirable for the application, follow the manufacturer’s instructions for replacing the device. Minimum operating temperature is
-20°C (-4°F).
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and
operated with minimum distance 20cm between the radiator & your body.
User Manual Notice for LicenseExempt Radio Apparatus
This device complies with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device. CAN ICES-005 (B).
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
FCC Responsible party
Globe Electric
15301 Shoemaker Ave, Norwalk, CA 90650
www.globe-electric.com
50457
1. Download the Amazon Alea app.
2. Power on your device.
Ensure your smart switch is installed correctly and powered on.
3. Scan barcode
• Launch the Amazon Alexa app.
• Select “Add a Device”.
• Select “Smart switch”, locate Globe Electric and follow the in-app
instructions on how to scan the 2D barcode.
Please note:
Don’t have a barcode?
Select "Don't have a barcode?" in the Alexa app and follow the in-app
instructions on how to connect without a 2D barcode.
How to factory reset device
If you are struggling to set up your device, or if the device
was already connected to a network, perform a factory reset by following the
instructions below:
1. Turn the device ON
2. Press and hold the ON/OFF button down for 10 seconds.
3. Let go of the button once the light is flashing RED and GREEN indicating a successful reset.
Check out product videos on
Smart Devices playlist.
The device is automatically in pairing for 5 minutes once powered on. When you scan the
barcode, the white light will flash indicating the pairing is successful. If within 5 minutes,
it does not connect, turn the device OFF and ON again to re-enter pairing mode.
QR
Please keep these instructions
in a safe place. This is the only
duplicate of the unique QR
code for your product. ou
may need it to reconnect the
product to your account or
transfer it to another account.