as eR Single pole connection refers to when | light Is controlled by 1 switch. The Traveler brown) wire Is not needed for this scenario. For lights switched A from ONE location. For solitaire specification, 1 Anemone the existing wall plate and sores from the wall shier having turned off the power at the circulate breather and tested the outlet with Lingering taste 2. Remove the existing switch from the wall and label the wires with the appropriate stickers Included In the box.
Raid Lid For lights switched from a TWO locations. 1 SMART SWITCH + 1 TRADITIONAL 3-WAY SWITCH SO AAA EI RB une For retrofit specification, 1 Her move the existing wall plate and screws from the wall after having turned off the power st the circuit breaker snd tested the cutie with a voltage tester 2 Bernese the existing switch From the wall and label the wires with the appropriate stickers included In the box. 5.
2 SMART SWITCHES NOTE: to produce s functional Way connection, both smart switches read to be the same brand, This switch Is not compatible with other brands. Forebode applications 1 Remove the exiting wall plate and screws From the wall after having Third off the bower at the ileum breaker and tested the curler with a voltage taster. 2. Overborne the existing switch From the wall aod label the wires with the appropriate stickers included In the box.
