Med Duty Griddle Owner's Manual GEG24 GEG36 GEG48
Page 7
Installation
7. Proper connection and power supply are necessary for efcient performance.
8. The external wiring must be in conduit or an approved type of exible cable suitable for operation at
temperature indicated at the conduit hole, and in a proper size to carry the load.
9. The supply circuit must be properly fused and equipped with a means of disconnecting, as required by the
local electrical code. For griddle with plugs and leads set, simply provide a suitable power point
and connect.
This equipment gets EXTREMELY HOT so make sure all ammable/combustible materials are set away from this
equipment.
Feet
Install feet by screwing each foot into the threaded openings on the bottom of the griddle. Failure to use
feet will void warranty and could cause unsafe conditions.
Leveling
Level unit by adjusting the four feet and tighten securely. The adjustable feet have an adjustment of one inch for
lineup with other Globe countertop lines. Check feet every 60 days to make sure they are tight.
Assembly
Take catch tray and slide into runners below the elements and place into rack. Once in position, catch tray will
catch food product crumbs, grease and drippings.
COMMISSIONING:
Commissioning of your new Griddle is of the utmost importance. Commissioning is the thorough and methodical
testing of the equipment, sub systems, and systems to make sure that the nal product functions properly and safely
at the work site. By identifying potential problems (i.e.: equipment location, ventilation, local re/electrical codes,
installation, operator training and certication) prior to equipment being placed into service, costly outages and
potential damages can be avoided.
SAFETY ALWAYS.