Med Duty Griddle Owner's Manual GEG24 GEG36 GEG48

Page 8
Safeguards & Safety Instructions
TO AVOID SERIOUS PERSONAL INJURY:
• DO NOT operate griddle before reading the instruction manual.
• ALWAYS disconnect or unplug electrical power before cleaning, servicing or adjusting parts or
attachments.
• NEVER bypass, alter, modify or attach unauthorized parts to this equipment.
Doing so can create hazards and will void warranty.
• NEVER operate griddle with a damaged power cord or plug.
• NEVER leave griddle on overnight or for prolonged periods of non-use.
• NEVER use griddle as a heating source for your kitchen, space, or room.
• ALWAYS keep hands, hair and clothing away heating elements.
IMPORTANT SAFEGUARDS & SAFETY INSTRUCTIONS
When using electrical food equipment, basic safety precautions must always be
followed, including the following:
• Do not touch hot surfaces. Use handles or knobs.
• To protect against risk of electrical shock, do not put griddle in water, dishmachine or liquid.
• Never directly touch heating elements while griddle is on.
• Unplug from power outlet when not in use, before putting on or taking off parts, and before cleaning.
• Do not operate equipment with a damaged cord or plug or after the appliance malfunctions or is
dropped or damaged. Call for service.
• Use of attachments not recommended or sold by the manufacturer can cause re, electrical shock
or injury.
• Do not use outdoors.
• Do not let power cord or extension cord hang over edge of table or counter or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not use this equipment for use other than the use intended by the manufacturer.
• Do not yank on cord to disconnect.
• Never plug equipment in where water oods the area.
• Place the appliance on a rm, stable surface.
• The Globe griddle does not contain any user-serviceable parts. Globe dealers or recommended
qualied technicians must carry out repairs. Do not remove components or service
panels on this product.
• Globe takes every care to make sure that all products are safe. Steel cutting procedures used to manufacture
these items result in sharp edges. These sharp edges are removed; however, the operator must take care
when in contact with this piece of equipment.
• During operation griddle reaches high temperatures, in turn, heating stainless steel surfaces.
Take extreme care when operating.
• Switch OFF power to disconnect griddle from plug for cleaning.
• Allow griddle to cool down after use and before dismantling for cleaning; the unit will be too hot to
handle immediately after use.
• Griddle is equipped for the voltage indicated on the nameplate mounted on the rear of
the unit. Griddle is designed for use on alternating current (AC) only.