1800W Countertop Induction Range Owner's Manual

Page 9
Operating Instructions
COOKING:
1. Connect the appliance to the power outlet.
2. Once the range is properly connected, the unit will beep once and the light next to ON/OFF button will illuminate indicating
power has been applied to the unit.
NOTE: If the power indicator light is not illuminated and the unit is plugged in, check the power cord connection.
3. Place suitable cookware onto the center of the range.
NEVER place empty cookware on the appliance.
NOTE: The cooktop’s surface will not heat up if the wrong type of cookware is applied or there is no cookware
placed on the unit.
NOTE: The induction range will automatically power down if there is no functional operation within 2 hours.
4. Set ‘Heat’, ‘TEMP’, and if desired, ‘TIMER’.
A. Press the ON/OFF button one time. The ‘HEAT’ indicator light will begin ashing
B. Press “FUNCTION”
C. Set ‘Heat’ (Heat is the amount of power in WATTS applied to the cookware.)
D. Toggle from/between ‘Heat’, ‘Temp’, and ‘Timer’ settings. The light indicator next to each
function will illuminate to indicate which function is ready to be set.
NOTE: Press the UP/DOWN buttons repeatedly to set the timer. Or, to move quickly through the timer, press and hold the
UP OR DOWN button.
Set HEAT: Function > Heat = Cooking Power in WATTS (light will be illuminated next to the selection).
UP or DOWN “
or ”. The default power of heating is 1200W. Adjust the power rate from 500W-1800W.
Set TEMP: Function > Temp (F) (light will illuminate next to the selection)> UP or DOWN “
or ”.
The default temperature is 200°. Adjust the temperature from 140° to 460°.
Set TIMER: Function > Timer (light will illuminate next to the selection) > UP or DOWN “
or ”.
Adjust the timer from 0-180 minutes in increments of 5.
Timer OFF: If the TIMER is not set, the induction range will properly function in ‘ON’ mode up to two hours.
5. Timer ON:
IMPORTANT: In order for the timer to be running, the ‘Timer’ Indicator light must be illuminated.
A. Use the function key to navigate to the timer selection and select a time.
B. Once the desired time has been selected, let the range time and indicator lights blink until they illuminate solid
on their own. Now your timer is set.
Once the timer has reached “0”, the induction range will beep once indicting time has ended and the range is powering down.
IMPORTANT: The induction range will shut off automatically after the ‘TIMER’ reaches “0”. The cooktop will power down, the
fan will cool the unit/parts, and the fan will shut off. Repeat operations 1-4 to turn the range back on.
6. Turn ‘OFF’ the range and/or disconnect power to the unit after use.
After cooking/warming is complete, press the ON/OFF button to turn off the unit. The range will stop heating, the fan will
cool down the unit and then shut off. The power indicator light will remain illuminated.
As long as the ‘ON/OFF’ indicator light is illuminated, there is power/current owing to the unit. Unplug the induction range
completely to disconnect the power to the unit
WARNING: Always unplug the unit before cleaning to prevent electric shock.