Owner's Manual

Page 9
9. The time will be displayed as military time with time separators between the hour, minute and seconds. If the
time is correct, press the Enter key. If not correct, key in the new time (hour, minute, seconds) and press the
Enter key.
10. After the date and time have been entered, press the Mode key. Display will show 19001-000 ENT or CLR
11. Press the Mode key three times to return to normal operation.
NOTE: To make sure that the date and time is correct, power off the scale and then power on the
scale to view the “Clock Check” screen.
Entering Shop Name And Address (optional)
1. Make sure the scale is plugged in, turned on, and there is nothing on
the weigh platter.
2. Key in 9000 and press the Mode key. The display will show: P00
PROGRAM
3. Key in 5 and press the ENTER key. Display will show: P06 STORE
4. Key in 111111 and press the PLU key. Display will show: P06 STORE
5. Press the Enter key. Display will show: P06-00 NO. 0000 >No<
6. Press the Enter key. Display will show P06-01 NAME >ED
7. Press the Edit key. Display will show 13001-0000 ENT or CLR.
8. Press the Enter key. Display will show INP 0001-0000-00
See Figure 9-1.
9. Use the Scale Set-Up keysheet to key in the store name
(48 character maximum).
NOTE: Only one character of the store name will display at a time. Use the right arrow key on the
Scale Set-Up keysheet to cycle through the letters of the store name.
NOTE: To enter one of the symbols (not a letter), select the symbol key. If the symbol needed is on the
top of the symbol key, select the shift key then the appropriate symbol key.
NOTE: To delete a character that is not needed, press the Back Space key or arrow keys and Char
Delete key.
10. After the store name has been entered, press the Mode key. Display will show 19001-0000 ENT or CLR
NOTE: Press Enter to save or CLR to cancel.
11. Press the Enter key. Display will show: P06-00 NO. 0001 >No<
12. Press the down arrow on the Scale Set-Up keysheet two times. Display will show: P06-02 ADDRESS >ED
13. Press the Edit key. Display will show INP 0001-0000-00
14. Use the Scale Set-Up keysheet to key in the store address (this includes the street address, city, state, and zip)
(48 character maximum).
NOTE: To enter one of the symbols (not a letter), select the symbol key. If the symbol needed is on the
top of the symbol key, select the shift key then the appropriate symbol key.
15. After the store name has been entered, press the Mode key. Display will show 19001-0000 ENT or CLR
NOTE: Press Enter to save or CLR to cancel.
16. Press the Mode key three times to return to normal operation.
Line
Number
Total
Character
Number
Current
Position
Font
Size
Current
Character
Initial Scale Set Up
Figure 9-1