PC User Program Manual

Page 34

Operation Explanation

Scale ShowsthescalenamespeciedintheScalesetup.

Shows the scale link number. The number is only used within ScaleLink

Pro 5 Lite Maintenance Utility to identify the scale.

Status Shows the current operation status of the scale.

Operation mode

Shows that the scale is turned on, connected to the network, and ready for

use.

In Use

Shows that the scale is in use (calling up a PLU, weighing or printing a

label).

Not Connected

Shows that the scale does not respond to communication via the network.

The scale is turned off or disconnected from the network.

Registration Mode

Shows that the scale has been set to registration mode (P) by manual

operation at the scale.

Setup Mode Shows that the scale has been set to setup mode (B) by manual operation

at the scale.

Subtraction Mode Shows that the scale has been set to setup mode (D) by manual operation

at the scale.

Total Mode Shows that the scale has been set to total mode (F) by manual operation

at the scale.

Sub-Total Mode Shows that the scale has been set to sub-total mode by manual operation

at the scale.

Test Mode Shows that the scale has been set to test mode (C) by manual operation

at the scale.

Enable/Disable Shows Yes, if the scale is enabled, No if disabled.

Connected Shows Yes, if the scale is currently connected, No otherwise.

# Errors Shows the total number of errors logged in the scale error log screen.

Last Error Shows the date of the most recent error reported from the scale.

Error Shows the most recent error reported from the scale. A detailed list of

scale errors is shown in the error log screen.

Refresh Link

Updates all displayed information.

Enable/Disable

Enables or disables the selected scale. ScaleLink Pro 5 Lite does not

send data to disabled scales.

Remote Diagnostics

Reads the remote diagnostics data from the scale and opens the Remote

Diagnostics dialog.

ScaleCong

ReadsthescalecongurationdatafromthescaleandopenstheScale

Congurationdialog.

The operation and explanation of each Scale Communication Status Monitor tool bar button is described below.