PC User Program Manual

Page 39
5.1 Send to Scale
Send to Scale sends the updated label formats and associated data from the Master Library to the scale(s).
1. SelectTools,CongurationLibraryfromthemenuorselecttheCongurationLibraryiconfromthetoolbar.The
Master Library will display. See Figure 39-1.
2. Select the scale from the Master Library.
3. Select Comms, Send to Scale, All Data in Database from the menu or select the Send to Scale icon from the
tool bar. The Select Scales window will display. See Figure 39-2.
Note: If only one scale is set up in your network, after you select Comms, Send to Scale, All Data in
Database from the menu, the Scales Comms Progress window will open. The Select Scales
dialog box will only appear if there is more than one scale setup in your network.
Select
5. Communications with Scale
Figure 39-1
Figure 39-2