Quick Start Guide
Page 3
Rev. Dec. 2015
Quick Start Guide - PC & Scale Set Up
The GSP30B with SLP-V Lite is supplied with the components listed below. Ensure that your PC meets the
System Requirements according to those listed on the front page of this Quick Start Guide and that all of the items
listed below are available prior to beginning this installation.
• GSP30B Scale
• This Quick Start Guide for the GSP30B Scale
• Instruction Manual for Globe Label Printing Scale (supplied with the scale)
• SLP-V Lite Software User Guide for Globe Label Printing Scale
• Globe SLP-V Lite Software
Transfer ScaleLink Pro 5 Lite Software Scale Data to the GSP30B Scale with
USB Flash Drive:
A USB Flash Drive (not supplied) can be used to transfer ScaleLink Pro 5 Lite software scale data to the GSP30B
scale without a PC or Nework connection.
1. Refer to Quick Start Guide - PC & Scale Set Up, Install SLP5Lite for the First Time to install the ScaleLink Pro
5 Lite software.
2. Open ScaleLink Pro 5 Lite software to create PLUs, UNI-3 Presets, Store Settings, ect. Refer to SLP-V Lite
Software User Guide for Globe Label Printing Scale for instructions on how to use the ScaleLink Pro 5 Lite software.
3. Once PLUs, UNI-3 Presets, Store Settings, ect. are created within the ScaleLink Pro 5 Lite software, it is
possible to transfer scale data to scales not connected to a PC or Network with the use of a USB ash drive.
Refer to SLP-V Lite Software User Guide for Globe Label Printing Scale, ScaleLink Pro 5 Lite, Send and
Receive, Export to CSV in Scale Format for instructions on how to transfer scale data with a USB ash drive.
Connect GSP30B Scale to a PC:
To use ScaleLink Pro 5 software with the GSP30B scale, an Ethernet Cable (not supplied) is required to connect
the GSP30B Scale to a PC.
1. With the GSP30B scale turned off, attach one end of the Ethernet Cable to the LAN
port on the left side of the scale and the other end to the back of the PC.
2. Turn on the power to the GSP30B Scale.
3. Refer to Quick Start Guide - PC & Scale Set Up, Install SLP5Lite for the
First Time to install the ScaleLink Pro 5 Lite software.
4. Refer to SLP-V Lite Software User Guide for Globe Label Printing Scale for
instructions on how to use the ScaleLink Pro 5 Lite software.
Connect the GSP30B Scale to a Network:
To use ScaleLink Pro 5 software with the GSP30B scale within a network, an Ethernet Cable (not supplied) and a
port on the network is required.
1. With the GSP30B scale turned off, attach one end of the Ethernet Cable to the LAN port
on the left side of the scale and the other end to an available port on the network.
2. Turn on the power to the GSP30B Scale.
3. Refer to Quick Start Guide - PC & Scale Set Up, Install SLP5Lite for the
First Time to install the ScaleLink Pro 5 Lite software.
4. Refer to SLP-V Lite Software User Guide for Globe Label Printing Scale for
directions on how to use the ScaleLink Pro 5 Lite software.
2153 Dryden Rd.
Dayton, OH 45439
TECH SUPPORT: 1-866-260-0522
Specications are subject to change without notice.