Use and Care
Table Of Contents
- Instruction Manual for GlobeLabel Printing Scale Model GSP30B
- Index
- Important Notice
- Safety Tips
- Installation
- Key Scale Components
- Loading/Unloading Labels
- Initial Scale Set Up
- PLU (Price Look-up) Set Up
- Preset Key Set Up
- Cassette Set Up for Standard (E11) Labels
- Cassette Set up for Safe Handling (E12) Labels
- Cassette Set up for Ingredient (E13) Labels
- SAMPLES of all available labels for the GSP30B
- Operating Instructions (PLU’s)
- Operating Instructions (Function Keys)
- Cleaning/Maintenance
- Troubleshooting
- Page 24Tare Weight
- USB Scale Backup and Restore
- Additional Features
- Limited Scale Warranty
- Index
Page 17
Cassette Set up for Ingredient (E13) Labels
Use Cassette’s to select different label sizes. After a Cassette preset function key has been assigned, follow the
steps below to program the label spec and label format for each cassette.
NOTE: Ingredient (E13) Labels can not be completed without the use of the ScaleLink Pro 5 Lite
Maintenance Utility Software. Refer to the Scalelink Pro 5 lite Software User Guide for
instructions on how to setup a ingredient label.
Before the Ingredient (E13) labels can be used, the scale needs to be set up for the new label size.
1. Load the labels. Refer to Loading/Unloading Labels.
2. Make sure nothing is on the weigh platter.
3. Select the desired Cassette preset function key.
NOTE: Scale will beep two times to indicate Cassette preset function key has been selected.
4. Key in 6000 and press the Mode key. Display will show: B00 SETUP
5. Enter 951753 and press the PLU key.
6. Key in 11 and press the Enter key. Display will show: B11 CASSETTE
7. Press the Enter key. Display will show: B11-01 CAST No. “01”
NOTE: Up to seven cassettes can be programed. Each cassette contains the label spec and label
format for a label.
8. Press the down arrow key on the Scale Set-Up Keysheet three times. Display will show: B11-04 FMT No.
“001”
9. Key in format number “003” and press the Enter key. Display will show: B11-04 FMT No. 003
10. Press the End key. Display will show: B11 CASSETTE
11. Press the down arrow key on the Scale Set-Up Keysheet one time. Display will show: B12 LABEL SPEC
12. Press the Enter key. Display will show: B12-01 LABEL No. “03”
13. Use the down arrow key to select B12-12 LABEL GAP 2.0 mm
NOTE:Labelgapisthepitchbetweenlabels.Dependingonthelabel,asmalladjustmentmayneedto
be made.
14. Press the down arrow key on the Scale Set-Up Keysheet one time. Display will show: B12-13 SENS DIST.
“71.0mm”
15. Key in 710 (do NOT enter decimal point) and press the Enter key.
16. Press the End key. Display will show: B12 LABEL SPEC
17. Press the down arrow key one time. Display will show: B13 LABEL FORMAT
18. Press the Enter key. Display will show: B13-01 <BASIC>
19. Press the down arrow key on the Scale Set-Up Keysheet two times. Display will show: B13-01-02 WIDTH
“560”
20. Key in 560 (do NOT enter decimal point) and press Enter key.
21. Press the Enter key again. Display will show: B13-01-03 HEIGHT “440”
22. Key in 800 (do NOT enter decimal point) and press the Enter key.
23. Press the Mode key three times to return to normal operation.
NOTE: It may be necessary to print two or three labels in order for the alignment to appear correct on
the label.