User Manual

Page 13

Operating Instructions

DIGITAL CONTROL INSTRUCTIONS

Untimed / Manual Mode instructions and controls for the SP62P, SP62P-4 and SP80PL

Mixer must be OFF before installing attachments. Do NOT use attachments while mixing.

NOTE: Make sure bowl is up and bowl guard is closed. Mixer will not start if bowl and bowl guard are not in the

proper operating position.

Press BOWL “Up” arrow to activate the power bowl lift.

Set the speed control to the desired speed.

Untimed - MANUAL MODE

1. To begin operation of mixer in Manual Mode, press

the “MAN” button. The display will illuminate a small

dot of light in the lower right-hand corner of the seconds

timer display.

NOTE: Mixer will not start if bowl is not all the way up.

Additionally, the bowl guard must be completely closed.

2. Press START button to begin mixing. Press STOP to

discontinue mixing.

Always STOP the mixer BEFORE changing speeds.

NOTE: The SP62P, SP62P-4 and SP80PL will automatically shut

off if the speeds are changed while the mixer is in operation.

NOTE: The timer does not work in Manual Mode.

To use the timer feature, follow the Timer Mode instructions.

TIMER MODE

1. To begin operating the mixer in TIMER mode, press

the TIMER button.

If starting mixer for the rst time, or if power is lost, the

TIMER display will only illuminate in all zeros “0”; otherwise,

it will display the last mixing time that was entered.

2. Select the number of minutes and seconds by using the up

and down arrows located under the timer digital display.

The rst set of up-down arrow buttons control the minutes

and the second set of up/down arrow buttons control

the seconds.

Press and continuously hold the up arrow buttons to the desired minutes and seconds. Press and continuously

hold, the button scrolls through the number cycles quickly. (To slow down the selection and to better control the

setting time, press the up or down arrow button do not continuously hold the button down).

3. Once the desired mix time has been set on the timer, press the START button to begin mixing.

Always STOP the mixer BEFORE changing speeds.

NOTE: The SP62P, SP62P-4 and SP80PL will automatically shut off if the speeds are changed while mixer is in

operation.