User Manual
Page 14
4. Once the START button is pressed, mixer timer numbers will begin to descend.
The timer and mixer can be interrupted at any time by pressing the STOP button. If the timer cycle is interrupted and
the mixer has not yet nished its set mixing time, the mixing cycle can be continued from where it left off by pressing
the START button.
NOTE: If a cycle is interrupted by the bowl guard being opened or the speed of the mixer being changed, mixer will
stop. After bowl guard and bowl lift are closed and locked into position, START button can be pressed to
continue the programmed time.
To add additional minutes or seconds to a mix time, STOP mixer, press TIMER and adjust the cycle mixing time.
Press START button to begin mixing once again.
5. At the end of a timed mixing cycle the timer will count down to “00” minutes and “00” seconds, mixer will stop,
and the timer will return to displaying the last mix cycle time that was entered.
6. To begin another mix cycle with the same set time as the previous mix, press the START button.
If the mix cycle time needs to be adjusted up or down, set the new desired time and then press START button
to begin mixing.
Mixer timer will always reset back to the last mix time that was set unless the plug or power is disconnected to the
mixer. If power is lost to mixer, the mixing time will need to be reset to the desired time.
4
Operating Instructions