User Manual
Page 16
Globe mixer will provide years of uninterrupted service if you do the following:
Installation
• Do not use an extension cord to connect electrical power.
• Make sure all 3 Phase units (see data plate) run in the direction of the arrow on front of the machine.
Operation
• Turn off mixer before changing speeds.
• Follow the Capacity Chart for mixing dough. Refer to Capacity Chart section.
• Use only rst (1) speed for mixing dough. 2nd speed must never be used on 50% AR or lower with the
exception of the SP60. The SP60 requires a 50% reduction in batch size to mix in speed 2 with 50% AR
dough.
• If the unit shuts off during mixing (overload protection trips), reduce the batch size.
Maintenance
Important Points
Recommended Maintenance
PART REQUIRED ACTION FREQUENCY
Bowl Slide Rods Apply Globe oil (mineral oil) on bowl slide rods.
Raise and lower bowl to distribute the oil onto
the rods.
If bowl becomes difcult to
raise or lower.
Gear Oil Meter
(SP62P, SP62P-4
and SP80PL only)
Contact a Globe authorized servicer to change the
gear oil.
Once a year. When the gear oil
meter shows the oil below half of
the circle.