Installation Guide

Step 5
Repeat steps 3 and 4 for the
two corner panels and mid-wall brace
at the LEFT side. See Diagram 4.
IMPORTANT:
Ensure the wider faces
of the corner panels are
facing front and back.
This step uses
pre-assembled components.
Step 6
Attach and secure both side top-wall
(left and right) rail assemblies to the
inside of the corner panels as shown,
using one screw at each end of rail.
See Diagram 5.
IMPORTANT:
The ends of the side top-wall
rail assemblies with the WIDE
section brackets MUST be
positioned at the FRONT of
the shed, and the NARROW
section brackets positioned
at the back of the shed.
IMPORTANT:
The two faces of the side top rails,
with multiple holes, MUST face
outwards and top of shed.
IMPORTANT:
The two faces of the back top rail,
with multiple holes, MUST face back
and top of shed.
BACK
FRONT
MID-WALL
BRACE
Diagram 4
1
2
3
8
CORNER PANELS
AT LEFT SIDE,
WITH WIDER FACES
AT FRONT & BACK
5
4
7
6
Step 7
Attach the BACK top rail as shown in Diagram 6.
HINT:
Push the corner panels out slightly,
to allow each end of the brackets
to be inserted.
Secure using one screw at each
end of the top rail, and secure
top of both corner panels to
back rail using two screws
per panel, as shown in
Diagram 6.
Diagram 6
BACK TOP RAIL
WITH HOLES FACING BACK
AND TOP
TOP-WALL
RAIL
BRACKET
BACK
13
LEFT
TOP-WALL
RAIL
BRACKET
PUSH
SIDE WALL
SHEET
OUT
BACK
TOP
RAIL
CORNER
PANEL
FLANGE
MUST FACE UPWARD
FRONT
BACK
CORNER
PANEL
(LEFT SIDE)
Diagram 5
RIGHT SIDE
TOP-WALL
RAIL
ASSEMBLY
BRACKET
WITH
NARROW
SECTION
AT BACK
LEFT SIDE
TOP-WALL
RAIL
ASSEMBLY
CORNER
PANEL
(RIGHT SIDE)
LEFT SIDE
TOP-WALL
RAIL
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015