Installation Guide

14
Step 8
Attach and secure the front top rail -
THE ONE
INSERTED, to the top-wall rail
brackets at front, as shown in
Diagram 7.
WITH DOOR GLIDES
This step uses a pre-assembled component.
FRONT TOP RAIL
WITH
DOOR GLIDES
Diagram 7
DOOR GLIDES
FACING
FRONT
FRONT
BACK
Step 9
Attach the back mid-wall brace
to the inside of the BACK
corner panels, at the
centre hole position, using
two screws at each end.
See Diagram 8.
IMPORTANT:
Holes at each end on
the thin face of the
back mid-wall brace
MUST face upward.
Step 9A
Secure the back and LEFT
side mid-wall braces together
using a corner brace and
four screws as shown in
Diagram 8A.
Repeat for right side.
LEFT SIDE
MID-WALL BRACE
INSIDE VIEW
OF LEFT BACK
CORNER PANEL
BACK
MID-WALL
BRACE
CORNER
BRACE
BACK
Diagram 8A
Diagram 8
BACK
MID-WALL
BRACE
HOLES AT
EACH END
ON THE
THIN FACE
MUST FACE
UPWARD
FRONT
BACK
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015