Installation Guide

Step 12
FITTING WALL SHEETS
Starting at the BACK RIGHT SIDE of the shed:
Refer to Diagrams 13 (4' deep shed) and 13A (3' deep shed).
Fit one half wall sheet (or one full wall sheet, depending on
the depth of your shed) overlapping the first ridge of the
RIGHT BACK corner panel and secure to the bottom,
top and middle rails/brace, using screws, and
following the numerical order shown in
both diagrams.
IMPORTANT:
READ BEFORE ATTACHING WALL SHEETS
FOLLOW STEP 12A and DIAGRAM 15 (SEE
NEXT PAGE) for fitting the last wall sheet at the
right side to the RIGHT FRONT CORNER PANEL.
16
EXAMPLES OF WALL SHEET CONFIGURATIONS
FOR 3 SHED SIZES - BACK & FRONT (width) & SIDES (depth)
6' WIDE x 4' DEEP SHED:
BACK
FULL FULL
SIDES
FULL
1
/
2
5' WIDE x 3' DEEP SHED:
BACK SIDES
FULLFULL
1
/
2
8' WIDE x 4' DEEP SHED:
FRONT
DOORS
BETWEEN
1
/
2
1
/
2
BACK
FULL FULL FULL
SIDES
FULL
1
/
2
Diagram 14
3' Deep Shed
Diagram 13A
FIRST RIDGE
OF RIGHT
BACK CORNER
PANEL
FRONT
BACK
8
5
11
1
0
12
9
4
3
2
1
7
6
FULL
WALL
SHEET
4' Deep Shed
FIRST RIDGE
OF RIGHT
BACK CORNER
PANEL
HALF
WALL SHEET
HALF
WALL SHEET
FIT THIS FIRST
FULL
WALL SHEET
FIT THIS SECOND
FRONT
BACK
Diagram 13
14
11
17
1
6
18
15
10
9
8
7
13
12
4
3
2
1
5
6
IMPORTANT:
Fit screws in this
order for all
wall sheets:
Bottom row, Top row,
Middle row, working
left to right.
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015