Installation Guide

Loosen off (but do not remove) the three screws along
the side edge of the corner panels.
Then, by slightly prising the back edge of the corner panels
away from the frame with your hand, slide the front edge
of the wall sheets in behind.
See diagram 15.
Re-tighten the three screws in the corner panels
and secure the wall sheets, using screws,
in the numerical order shown in
Diagram 13.
NOTE: For aesthetics we recommend the full wall sheets underlap the sides of the
front corner panels. This 'underlapping' creates the appearance of the shed wall being
one continuous sheet.
FITTING SIDE WALL SHEETS TO
FRONT RIGHT & LEFT CORNER PANELS.
Step 12A
17
LEFT FRONT
CORNER
PANEL
LEFT SIDE
WALL
SHEETS
ALL SCREWS
FITTED IN
SEQUENCE SHOWN
IN DIAGRAM 13
Diagram 15
BACK
RIGHT FRONT CORNER
PRISE UP
CORNER
PANEL AWAY
FROM FRAME
FRONT EDGE
OF FULL
WALL SHEET
RIGHT
FRONT
CORNER
PANEL
LOOSEN OFF
SIDE SCREWS
FRONT
FRONT EDGE OF
FULL
WALL SHEET
SLIDES IN BEHIND
CORNER PANEL
RIGHT FRONT
CORNER
PANEL
RIGHT FRONT CORNER
LEFT BACK
CORNER
PANEL
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015