Installation Guide

Attach full wall sheets to the back of shed,
starting at the RIGHT BACK corner panel
and overlapping each sheet.
Secure them with screws to the back bottom,
top and middle rails/brace, in the same
sequence as shown in Diagram 13.
See Diagram 16.
Step 12B
WALL SHEETS - BACK
Step 14
Secure the right front and
side mid-wall braces
together using a
corner brace and
four screws
as shown in
Diagram 18.
Repeat for left side.
FRONT
MID-WALL
BRACE
CORNER
BRACE
SIDE
MID-WALL
BRACE
INSIDE VIEW
OF RIGHT FRONT
CORNER PANEL
FRONT
Diagram 18
Attach the left and right front mid-wall braces
to the inside corner panels, securing with
two screws in each side as shown in
Diagram 17.
HINT: The left and right front mid-wall
braces can be distinguished by the
position of the holes on the vertical
and top faces.
See Diagram 17.
Step 13
18
LEFT FRONT
MID-WALL
BRACE
FRONT
HOLES ON
VERTICAL
FACE
HOLES ON
TOP FACE
RIGHT
FRONT
MID-WALL
BRACE
Diagram 17
FRONT
FULL
WALL SHEETS
BACK
RIGHT
BACK
CORNER
PANEL
ALL SCREWS
FITTED IN
SEQUENCE SHOWN
IN DIAGRAM 13
Diagram 16
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015