Installation Guide

20
IMPORTANT:
For the roof starters and sheeting,
every screw and bolt must have a washer.
NOTE:
Nuts and bolts fitted upside down along the
front top edge of roof starters and roof
sheets to front fascia must have the
washers placed under the nut.
SCREW BOLT
WASHER WASHER
Fit the RIGHT roof starter to the top edge
of the RIGHT side gable and secure to the
top of the front fascia using two nuts and
bolts in the positions shown in Diagram 21.
IMPORTANT:
Insert bolts from the bottom. Place washers under nuts.
Step 17
ROOF STARTERS & SHEETING
ROOF STARTERS
IMPORTANT:
NUTS AND BOLTS MUST
BE INSERTED AS SHOWN
Repeat procedure for left side
roof starter. See Diagram 23.
Step 17A
Secure the RIGHT roof
starter to the side gable
assembly using six
nuts and bolts with
washers, in the holes
along the vertical edge
of the roof starter.
See Diagram 22.
Then fit a screw in the
hole near the bottom of the
roof starter and into the top
edge of the back top rail
as shown in Diagram 22.
Diagram 21
TOP
EDGE OF
SIDE GABLE
RIGHT ROOF
STARTER
FRONT
BACK
NUT & BOLT
THROUGH
FRONT FASCIA
WASHER
MUST BE
PLACED
UNDER
NUT
FRONT
BOTH
ROOF STARTERS
IN PLACE
Diagram 23
Diagram 22
HOLE IN
VERTICAL
EDGE OF
ROOF STARTER
6 NUTS
& BOLTS
IN EDGE OF
ROOF STARTER
NOTE:
3' DEEP SHEDS
ONLY REQUIRE
4 NUTS & BOLTS
FRONT
BACK
RIGHT ROOF
STARTER
SCREW
INTO
BACK TOP
RAIL
FRONT
FASCIA
E N G L I S H
© Globel Industries Pty Ltd
GI00045 September 30 2015