Digital Satellite Receiver User’s Manual GLOBO 7010CR OPTICUM 7000CR OPTICUM 7100CR OPTICUM 4000TS OPTICUM 4100TS OPTICUM 4000TSCR OPTICUM 4100TSCR
CONTENTS 1. SAFETY ..........................................................................................................................3 2. ENVIRONMENT PROTECTION ......................................................................................3 INFORMATION ON DISPOSAL FOR USERS (PRIVATE HOUSEHOLDS) IN THE EUROPEAN UNION .......... 4 DECLARATION OF CONFORMITY.................................................................................................. 4 3. REMOTE CONTROL......................
Sleep ........................................................................................................................................................................................21 Sleep Time ...............................................................................................................................................................................21 A/V CONTROL.......................................................................................................................
1. SAFETY This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY: 100 - 250V AC 50/60Hz OVERLOADING: Do not overload wall outlet, extension cord or adapter as this may result in fire or electric shock. LIQUIDS: Keep liquids away from the STB. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Information on Disposal for Users (private households) in the European Union Used electrical and electronic equipment must be treated separately and In accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*.
3. Remote Control POWER Button Switch the STB between Operation and Standby mode. UFH Button Alter the UHF setting. MUTE Button Enable / Disable the Audio. Numeric Buttons Select the TV or Radio services and menu options. “0/ ” 0&ZOOM Button After other Numeric buttons, it’s used for 0 button. Other ways it’s used to enable the zoom function. “ ” PAUSE Button Pause or play video. ” PRE Button “ Select the previously viewed service. Return to the previous menu.
Switch the TV Standard on the Screen. TV/SAT Button Switch the TV or AV mode on the Screen. F1 Button Enter Organizing Services menu direct on the Screen. F2 Button Enter Manual Installation menu direct on the Screen. ” WHITE(SUBTITLE) Button “ Setup the Subtitle and watch on the Screen. “ ” RED(AUDIO) Button Perform RED button function in menu. Select Sound Track and Multilingual on the Screen. GREEN(Multi-picture) Button Perform GREEN button function in menu. Display Multi-Picture menu on the Screen.
6. Front panel POWER KEY: To switch the receiver power on/stand by v ,^ KEY : To change channels, or to move cursor up or down in the menu POWER Led: Lights up while the receiver is power on Remote Sensor: Detects infrared signal from remote control unit Display(4-Digit/7-Segment): Indicates operating status of receiver Signal Led: When receiving signal is strong, the signal led is lighted.
a serial cable. TV: This is used to connect your TV through SCART cable. SPDIF: Digital Audio interface, connect to AV amplifier SPDIF (optical) input terminal. ANT IN (optional): Connect to Analog TV antenna. TV OUT (optional): This is used to connect your TV through RF cable. 8. Connecting Your System How to connect your STB to various systems There are several ways of connecting the STB to your TV, VCR and/or Hi-Fi SYSTEM.
9. GETTING STARTED Install your dish Easy Install Press the POWER button to operate the receiver from “Standby” mode. If you did not install it before, the “Easy Install” Menu will be displayed automatically to guide you to install your box and dish. *Notice: There are two parts, Box Setting and Install Setting. Please follow the indication in this menu one step by one. Box Setting Language a. Install one satellite, Press RED button to edit it. In edit menu you can check signal.
Automatic install satellite and search channel The receiver will detect your antenna and search available signals and download services for you automatically. Manually install satellite and search channel You need to choose your interested satellites and set right parameters for LNB Type, 22KHz Tone, 12V, DiSEqC1.0 or Motorized DiSEqC1.2 or USALS items, then press RED button to do scan to complete install. For more details, please check chapter “Installation” of “Menu Operations”.
10. INFO button: check detail information of current service Move: select one or more services and press RIGHT button to select MOVE icon. Press UP/DOWN, P+/P-, 0~9 button to move the selected service to where you want to locate, then all the selected services will be reordered and move to the new location one by one. Lock: select one or more services and press RIGHT button to select LOCK icon.
- FAV service list, FAV information Operations: LEFT/RIGHT button: switch frame between service list, operating frame, FAV service list RED button: enter “Group” menu to switch service group GREEN button: enter “Options” menu for 4 shortcuts for choosing services: -Select All: select all services under current list -Unselect All: unselect all selected services -Select Others: select services except those been selected -Select by TP: select services belonging to certain transponder only FAV button: enter “FA
11. INSTALLATION - A map for the location of satellite We supply the following functions: A. Scan Satellite Installation 1. Use OK button to select one or more satellites at one time, then press RED button, an “Scan” menu will be displayed for you to select Scan Mode (ALL, FTAL, FTA_TV, ALL_TV) and Network (NIT OFF, NIT ON) options by LEFT/RIGHT button. 2. Press OK button to start scan. 3.
of signal or LNB your receiver is connected to. Press BLUE button, it will automatically detect DiSEqC connecting and set the right configuration of LNB as well. In less than 1 minute, it will show you the connecting status, you just need to press OK button to scan the connected satellites if any. C. Edit Press GREEN button to enter next main part: “Edit Satellite” menu. - D. TP Press YELLOW button to enter next main part: “Transponder” menu.
DiSEqC1.2 USALS is very convenient motorized DiSEqC system that supports DiSEqC1.3 command and also can get the satellite position automatically if you know your geographical location. Basically, the listed satellites have its Longitude and therefore the angle of the satellite can be calculated without problem. If you have USALS motorized system, then you can use the USALS as followings. a. My Longitude It means the longitude of your location.
Freq.:Use 0-9 buttons or LEFT/RIGHT button to enter new frequency. H/V: Use the LEFT/RIGHT button to select the polarization (H, V). H(Horizontal): 18V/19V is output through LNB cable V(Vertical): 13V/14V is output through LNB cable Sym.: Use 0-9 buttons or LEFT/RIGHT button to enter new symbol rate. FEC: Use LEFT/RIGHT button to select the Forward Error Correction (1/2, 2/3, 3/4, 5/6 or 7/8) if you are sure about the value, otherwise please select AUTO, software will automatically detect it for you.
all dishes connecting to this machine and scan the available services belonging to the satellite matched according to satellites and transponders data in current database. You don’t have to input any parameter of your antenna settings. Just press OK button to enter this “Auto Installation” menu then it starts scanning and shows you the result at the end of scanning. And it is very fast. Auto Scan Auto Update “Auto Update” is also a very new and fantastic function.
In this menu, you can press LEFT/RIGHT key to select the Region and set the “Antenna Power” on or off. CA Settings (OPTIONAL) Factory default Receiver has build in smart card module with CONAX system. By using cards in this system provided by operators, it is possible to watch many scrambled channels coded in this system. This menu shows detailed information about card inserted into card reader module.
Press OK button to set current database as default data. Press MENU/EXIT button to abort the operation. Delete all channel Press OK button to delete all channels. Press MENU/EXIT button to abort the operation.
12. Parental Control Preference Set “Parental Control” options to protect children watching programs. Please use UP/DOWN button to select one of the following items and press LEFT/RIGHT or OK button to set certain value. The “Preference” menu supports the receiver internal settings according to the connection of the receiver and external units. This menu includes “Language”, “Parental Control”, “Time Setting”, “A/V Control”, “UHF Setting” and “Miscellaneous Settings”.
your country’s time zone. The step is half an hour. Screen Ratio Set the screen aspect ratio of the TV set connected to this receiver (Auto, 16:9 Full, 4:3 Full, 16:9 Letter Box or 4:3 Letter Box). Daylight Time Set “Daylight Time” option to “ON” means the summer time is on thus local time is one hour late than normal. Wake Up If you set “Wake Up” option to “Enable”, you activate a wakeup timer. The service list will be displayed for you to set first view service using UP/DOWN button.
PAL Format UHF Offset Miscellaneous Settings You can set other miscellaneous settings in this menu by using UP/DOWN button to select one of the following items and press LEFT/RIGHT or OK button to set certain value.
13. System You can check information about your receiver or upgrade the firmware or data of the receiver through this menu. System Information We provide you production information about the receiver, such as “Model ID”, “Software Version”, “Hardware Version”, “Loader Version”, “Latest Update” and “Manufacture” information as well. Upgrade RS232 We provide you two solutions to upgrade the receiver via RS232 port. A. Upgrade through this menu. 1.
12.Game Receiver has one game for you. Please enjoy it.
14. Trouble Shooting If you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling authorized service agent. Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidate your warranty.
15. Specifications Satellite specification System standard Channel Storage Input Frequency RF Input level LNB Control LNB Power LNB tone switch Waveform Symbol rate Fully MPEGII/DVB Compliant Max.4000 TV and Radio Channels totally 950~2150Mhz -65~-25dBm DiSEqC1.0/1.
