User's Manual

Proprietary & Confidential Maribor, 25 June, 2020 Page 16 of 32
Wrench 13 for the screw and the M8 hex
nut
Bolt M8x25
Washer
Sector antenna
Mounting part
Washer 2x (normal, spring)
Nut M8
Figure 10: Bolt assembly
The eye cable tensioner is fitted to one of the holes on the sector antenna. The angle
between the mounting part and the sector antenna should be app. 95°.
Holes on the sector antenna for the tensioner.
Angle app. 95°
Figure 11: Assembled sector antenna and mounting part
Now the sector antenna and mounting part are prepared to be mounted on the mounting
pole. Before the actual mounting is done the metal jaws on the mounting part have to be
loosened.