User's Manual

Proprietary & Confidential Maribor, 25 June, 2020 Page 21 of 32
Nut on tensioner
Bolts on tensioner
Tensioner
Figure 17: Positioning guide part 2
Step 4: with the tensioner with adjust the antenna to the desired azimuth position
Step 5: tighten the nut on the tensioner
Step 6: tighten all bolts on the tensioner and the mounting part.
5.3.2 Elevation antenna positioning
Step 1: loosen the nuts on the mounting part with wrench nu. 13 marked with B
Step 2: loosen the nut on the lever with wrench nu. 13 marked with A