User's Manual

Proprietary & Confidential Maribor, 25 June, 2020 Page 26 of 32
5.4.2 Connecting units
Cables
An indoor unit is connected to an outdoor unit by means of a 2 coaxial cables, one is for
downstream and another one for upstream signal, 1 Ethernet cable and 1 power supply
cable. Cable length should not exceed 90m.
Recommended cables:
 Coax cable 50ohm – Ecoflex 15
 Ethernet cable – Belden 7918A
 Power supply cable – Helukabel JZ-600 4G4 (MAX outer diameter is 14,5mm)
 Coax cable 75 ohm - RG6 T60
Connectors – Outdoor (Sector antenna) side
 N-plug, male, solderless for Ecoflex 15
 RJ45 connector for Ethernet cable; for Antenna is used RJ45 connector with
AMPHENOL – RJF 6B (A code)
 Power connector M23, Male thread
Connectors – Indoor side
 N-plug, male, solderless for Ecoflex 15
 RJ45 connector for Ethernet cable;
 Power connector M23, Female thread
 F-connector - Cabelcon F-56-CX3 4.9 or PPC EX6
Tools and Equipment
 24mm wrench
 Utility knife
 Long nose pliers
 DMC M320 crimp tool
 RJ45 crimp tool
 19mm wrench
 Small metal saw
 F-connector crimp tool
 75ohm coax cable stripping tool
 Cutting pliers
 19mm spanner