User's Manual

Proprietary & Confidential Maribor, 25 June, 2020 Page 28 of 32
5.4.4 M23 Power connector installation manual (outdoor MP side)
Push clamp (Pos. 1), reducing sleeve (Pos. 2) with sealing ring (Pos. 3) on the cable.
Strip cable outer sheath 40 mm (Pos. 4)
Strip the wires (7mm) and crimp on contacts with crimping tool DMC M320
Clip contacts laterally into the contact carrier (Pos. 12).
Insert contact support (Pos. 12) in the insert sleeve(Pos. 13).
Insert sleeve (Pos. 13) and clamp (Pos. 14) tighten until it stops. – wrench size 24mm
Figure 22: M23-connector installation manual MP