Manual

10
BARREL CLEANING
• Unload your airsoft gun before cleaning it: Press the magazine catch
and remove the magazine. Make sure there is no BB left in the chamber.
• Do not force the rod into the barrel, as this could cause damage.
• Never drip silicone oil directly into the barrel.
NOTICE
MAINTENANCE (FOR CO
2
AIRSOFT GUN ONLY)
Clean your airsoft gun at regular intervals (250 shots) using a maintenance capsule.
We recommend the use of the Walther maintenance capsule 4.1683.
How to use the maintenance capsule:
Remove all BBs from the airsoft gun, insert the maintenance capsule and pierce it.
Turn the airsoft gun upside-down so that the trigger is on top. Then point
the airsoft gun in a safe direction and fire until the capsule is empty.
Put the safety on “safe”. Prepare a thin rod with a length of approx. 30 cm. Attach a piece of
cotton fabric to its end and clean the barrel with some silicone oil.
Occasionally clean the metal parts on the outside. Use a cloth which has been slightly
dampened with some gun oil.
2.
3.
4.
3 cm
1 cm
Piece of cotton
1.