Owners manual

weBBoat 4G Plus

Disable roaming: enables and disables roaming based on your needs.

NOTE: Data roaming charges may be high so check the rate plan in use with

your carrier.

Use 4G network only: set 4G as the preferred connection; if only 2G/3G

networks are in the area, the system will not connect to the data network.

Primary SIM used selection: To select the SIM to use for navigating the web

through the mobile network.

Autoswitch mode or mobile network forcing selection: to select the

autoswitch mode (automatic switching between mobile network and Wi-Fi

network, if present and properly configured) or to force the mobile

connection only. If autoswitch is selected, the Wi-Fi networks available will

be scanned.

Wi-Fi network connection status: displays the status of the weBBoat 4G Plus

connection with the external Wi-Fi network.

Signal level: Signal level of the external Wi-Fi network being used (min. 1 / max.

5).

SSID: name of the external Wi-Fi network being used.

Signal quality: displays the quality of the external Wi-Fi signal being used.

Wi-Fi Scan: scanning of the Wi-Fi networks available.

NOTE: The Wi-Fi scan button appears only if Autoswitch mode has been

selected. To scan, the autoswitch mode has to be selected.

The Wi-Fi networks available will be displayed (Fig. 25).

A padlock if encrypted and the signal quality will be displayed for each Wi-Fi

network.

Select the Wi-Fi network you want. If encrypted, the password will be

requested. Enter it and press OK in the iOS version or Save in the Android

version (Fig. 26).