Glooko Transmitter Instructions for use – for Glooko users
Contents Find your device..........................................................................................4-5 General Information.......................................................................................6 Product description..............................................................................................................................................................................6 About Glooko..............................................................................
Find your device Glucose meter Abbott FreeStyle Freedom Lite................................................................11 FreeStyle InsuLinx .........................................................................11 FreeStyle Lite...................................................................................11 FreeStyle Optium Neo..................................................................11 FreeStyle Precision Neo...............................................................
iCare Palmdoc II.........................................................................................13 Infopia Fintetest Lite....................................................................................13 GlucoLab...........................................................................................13 Insulet Omnipod® System.........................................................................17 Omnipod® Dash™ System...........................................................
General information Product description Glooko Transmitter is indicated for use by health care professionals in health care facilities to transfer predefined data from home monitoring devices to a server database. About Glooko Glooko offers health care providers an online solution that collects and stores all their diabetes patients’ data centrally, without worrying about any software installation.
Getting started You will need: 1. A compatible blood glucose meter, insulin pen, insulin pump or continuous glucose monitor (CGM); 2. Glooko Transmitter; 3. A Glooko account with Population Tracker access; 4. The device upload cable specific to the diabetes device. Please note that Glooko does not provide these cables. If you are missing a specific cable, please contact the device manufacturer.
Setup of Glooko Transmitter Setup without a cable box 1A Connect Glooko Transmitter 1. Connect the power supply, as shown above, and plug it into a power outlet. 2A Start up 1. Follow the on-screen instructions to complete the setup. 2. ”Ready to transfer” will be displayed when setup is done. Setup with a cable box 1B Connect Glooko Transmitter and USB Hub 1. Place the USB hub inside the Cable box. 2.
3 Connect a diabetes device Each diabetes device connects in one of the following manners: IR • USB cable (USB port or USB hub) • Infrared (built-in IR receiver or for some devices a SmartPix cable). • NFC (Near field communication) • BLE (Bluetooth Low Energy) Upload data 4 Follow the specific instructions on how to upload all compatible diabetes devices on page 11-19. Your transfer is complete when your screen turns green. Sign in to your Glooko account 5 Go to https://my.glooko.
Additional information If an update is ready, you can choose to restart immediately. Otherwise Glooko Transmitter will update automatically after 10 hours. If the upload process was unsuccessful you will be notified. Please follow the on-screen instructions. More functions are available by tapping the menu icon. Select ”Transfer Bluetooth device”. Select the device you want to transfer and follow the on-screen instructions.
Compatible devices and transmission methods Below are instructions on how to upload diabetes data from a compatible device using Glooko Transmitter. Unless explicit upload instructions are provided for the device, you simply need to connect it to the Transmitter or USB hub with its specific USB cable or via IR, Bluetooth or NFC and it will upload automatically. You will need a Glooko account with Population Tracker access.
Glucose meters and CGMs - connected with USB cable Continued from previous page AgaMatrix WaveSense Jazz™ AgaMatrix USB cable Animas OneTouch Ping (meter) Mini USB Connect and press the meter’s power button. Arkray Glucocard 01 Glucocard Vital Relion Confirm Relion Prime Glucocard Shine Arkray USB cable (2.5 mm) Glucocard Shine XL i-Sens USB cable (2.5 mm) Glucocard Shine Connex Glucocard Shine Express Glucocard Expression Micro USB Medcore Care + GlucoCard Expression USB cable (3.
Glucose meters and CGMs - connected with USB cable Continued from previous page Bionime GE100 Bionime (Pura + Rightest) USB Bioseven lineaD ORO Bioseven USB (2,5 mm) GlucoRx HCT Nexus Nexus Mini Q Mini USB iCare PalmDoc II Mini USB i-SENS Alphacheck Professional CareSens BGM/Tee2 CareSens Dual CareSens N CareSens N POP Connect and press the meter’s power button.
Glucose meters and CGMs - connected with USB cable Continued from previous page Menarini GLUCOCARD SM Micro USB GLUCOCARD G+ Menarini white USB (3,5 mm) GlucoMen LX2 If the meter displays: E-3, disconnect it wait until the display is off, then connect the meter again. Menarini blue USB (3.
Blood glucose meters - with infrared connection IR window on Glooko Transmitter Set the meter in upload mode by following the instructions below. Place the glucose meter’s top end directed towards the IR window on Glooko Transmitter. i Please make sure to keep the device completely still during the upload.
Glucose meters & CGMs - connected with Bluetooth or NFC ForaCare FORA 6 Connect FORA Diamond MINI DM30 FORA GD40h Please see the instructions regarding transferring Bluetooth devices on page 10. Terumo Medisafe Fit Smile Place the glucose meter on the NFC pad on top of Glooko Transmitter – and follow the on-screen instructions. CGMs - connected with USB cable i Note: If you have a USB hub connected to Glooko Transmitter, the USB hub must be powered by its own power supply.
Insulin pumps - connected with standard USB cable i Note: If you have a USB hub connected to Glooko Transmitter, the USB hub must be powered by its own power supply. Equil/Wellion MICRO-pump Micro USB Insulet Omnipod® Dash™ System Omnipod® System Micro USB Mini USB Medtronic 630G 640G 670G USB port on meter Roche Accu-Chek Solo Micro USB Tandem t:flex t:slim 1. Plug DASH™ into Transmitter with the USB-A to Micro cable. 2. Tap Export on DASH™. 3. Unplug DASH™, and plug it back in. 4.
Insulin pumps - connected with infrared cables Roche Accu-Chek Smart Pix cable Roche Accu-Chek Smart Pix 2 cable Compatible infrared cables Roche Accu-Chek Aviva Insight Accu-Chek Performa Insight Smart Pix 2 Note! Connect the handset of your pump with a micro USB cable to the Smart Pix 2. Roche Accu-Chek Spirit Combo IR Smart Pix or Smart Pix 2 Note! Smart Pix software version 3.02 or higher is required when using Smart Pix. 18 1.
Insulin pumps - connected with NFC NFC pad Terumo Medisafe WITH 1. Make sure the main menu is showing on the remote control for the pump. 2. Place the remote control on the NFC pad on top of Glooko Transmitter – and follow the on-screen instructions. Please note that the transmission symbol on the back of the remote control needs to be aligned with the center of the NFC pad on Glooko Transmitter.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.