User manual

20
GB

Do not blow out blocked nozzles using the mouth.

Do not point the end of the spraying lance at yourself when unscrewing it.

Changes or improvements to the device are not permitted without the agreement of
the manufacturer! Never bypass, modify or remove the safety equipment.
2.3 Danger due to damage to equipment
ATTENTION
Improper use can cause damage to the device!
For this reason, observe the following safety instructions:

Protect the device against long exposure to the sun and frost.

Do not store the device in livestock buildings due to the ammonia vapours
(danger of brass cracking), do not fill with solutions containing nitrogen or
phosphates.
3 Before the device can be used
This chapter contains information about the delivery condition.
3.1 Delivery condition
The standard device is delivered as follows:
- Plastic quick closure valve with integrated pressure gauge
- Brass spraying lance with hollow cone nozzle
- Extension tube 0.5 m (Type Hobby 1800, Pro 1300/1800)
- Two adjustable carrying straps with pads for pump lever which can be operated left or
right-handed (Type Hobby 1200)
- Two adjustable carrying straps with pads, and a lap belt, for pump lever which can be
operated left or right-handed (Type Hobby 1800)
- Padded carrier system for pump lever which can be operated left or right-handed, and
mountable handle (Type Pro 1300/1800)
- Pump lever with spraying lance seat
- Container with transparent viewing stripes (fill level checking)
- 1 x user manual and product information
Any accessories will be included individually packed.
RZ_KRSG_EN.qxd:Text_EN 08.02.2013 16:04 Uhr Seite 20