User manual

21
GB
4 Technical data
Piston knapsack sprayer Type Hobby 1200/1800 Type Pro 1300/1800
Max. filling capacity in litres: 12/18 13/18
Permissible operating pressure: + 40°C + 40°C
Empty weight: 3,45 kg / 4,30 kg 4,00 kg / 4,90 kg
Hollow cone nozzle, spraying angle 55° 55°
Delivery volume at
1.5 bar spraying pressure: 0.42 l/min 0.42 l/min
2.0 bar spraying pressure: 0.49 l/min 0.49 l/min
2.5 bar spraying pressure: 0.50 l/min 0.50 l/min
Container material: Polyethylene Polyethylene
Pump material: Polyethylene Brass
Mesh size of filter in
quick closure valve: 0.9 mm 0.9 mm
Mesh size of filling strainer: 1 mm 1 mm
Residual quantity after horizontal
emptying: < 150 ml < 150 ml
5 Assembly
5.1 Shoulder strap/carrier system
Figures 1 - 8
Depending on the model, your device is equipped with a padded shoulder strap or a carrying
frame.
Depending on the required operating position of the pump lever (right or left-hand side),
the shoulder straps can be mounted for right or left-handed persons on all model types.
The pump lever should be on the left for right-handed persons.
Type Hobby 1200/1800: Padded shoulder strap
Pass upper loop through the middle slot. Insert the mounting element into the loop. Pull
the strap back until it is caught in place.
Pass the two lower strap ends as shown through the metal strap buckles.
Type Hobby 1800: Additional lap belt
Mount the lower holding points as shown for the lap belt.
Pass the upper straps through the left and right slots and then pull through the strap
buckles as shown.
Type Pro 1300/1800: Carrier system with chest strap (model Pro 1800 includes a lap
belt)
Pass the upper middle strap through the middle slot and pull through the strap buckle as
shown.
Then mount the lower 4 holding points (2 outside / 2 inside) for the carrier system as
shown.
Pass the upper outer straps respectively through the left and right slots and then pull
through the strap buckles as shown.
8
7
6
5
4
3
1
2
RZ_KRSG_EN.qxd:Text_EN 08.02.2013 16:04 Uhr Seite 21