User's Manual

3. Setup
XiteSolutions North America Inc.
11
Settings
Access the Settings by using the Setup icon in the Main Menu. There are three
Settings that can be changed and these are System, Video, and Audio. To exit the
Settings menu at any time, press the Settings icon in the top left of the screen.
3.1 System Setup
By touching the SYSTEM button, the settings for the system part of the Infotainment
Center can be changed.
AUX Zone: This option selects the AV source for a display connected to the AV
output. The following sources can be selected: Main/Navi/HDMI/AUX/CAMERA/Off.
Audio only sources of Radio/SIRIUSXM/iPod may be selected. Control of most
functions must be done from the main screen.
Beep Tone: Turn ON/OFF audible sound when touching the LCD screen. The Beep
Tone will also provide warning of LCD display closing and other cues.
Rear View: This option selects whether a rear view camera is connected. When ON
the display will automatically switch to camera mode when the reverse gear is
engaged or a trigger signal is received. When no camera is connected, select OFF.
Standby Screen: Selecting ON, the Infotainment Center will display your clock
when the unit is powered off by press and hold the PWR button while the vehicle
remains on.
Language: Here the language of the User Interface can be selected (English,
Spanish, or French).
Auto Dim: The brightness of the LCD display will be adjusted depending on the
selected preference: Sensor/Manual/Auto/Auto(GPS).
NOTE: Please use all available safety features and procedures to ensure proper driving to
avoid damage and/or injury.