User's Manual

2. Display
XiteSolutions North America Inc.
7
2.1 Main Monitor Display
Functions:
Bluetooth Microphone
PWR
1. Turn on the ignition to power up the Infotainment Center. The buttons on
the front of the unit light up. When the Infotainment Center is started up, it
will immediately go to the last mode (memory on playback) before it was
turned off.
2. In order to put the unit in standby mode, press the Power button (PWR)
for more than 2 seconds. During standby, the display will show your
vehicle graphic or be off. Your preference can be set in the Settings menu
(See page 10). Press the Power button again to start up again.
3. In order to turn the unit off completely remove ignition key and/or ensure
any auxiliary battery power to the system is turned off.
MENU
1. Tap the Menu button to go to the Main Menu.
2. When in the Main Menu, use the touch screen to select the desired
functionality.
3. You can also access the Main Menu from any screen by tapping the
function icon in the top left of the current screen.
NOTE: When viewing video in full screen please touch the screen once to bring up the screen
header which will display the function icon. Tap the icon to return to the Main Menu.
DIM
1. Press to manually adjust the brightness of the LCD (1 to 5).
-/+ VOLUME CONTROL
1. The volume level can be adjusted on the front of the Infotainment Center
display by using the volume up and volume down buttons or by the
steering wheel control buttons (optional).
2. The volume level can be muted completely by briefly pressing the MUTE
button on the front of the Infotainment Center. The MUTE logo will appear
the display.
NAVI
1. Press the NAVI button to go to the navigation system.
2. While viewing your navigation press the NAVI button to return to your
active source. If you are running a navigational route, audio voice prompts
will continue to be heard over your speakers according to the Navigation
audio settings you have selected in the settings menu (see page 11).
3. To hear only your navigation audio voice prompts press and hold the
NAVI button for 2 seconds. This will mute your current audio source until
you leave the navigation screen.
FAV
1. Your Infotainment Center is equipped with a favorite source hotkey. Press
the button to directly access your favorite audio source. Favorite audio
source can be set in the Setup -> System -> Favorite mode on page 2/3.
MUTE
1. Press to Mute all audio including navigation prompts.
IR receiver for remote control operation an LCD dimming sensor
5
5
6
7
8
4
3
2
1
9
1
2
3
4
5
6
7
8
9