Instruction Manual

7 On-Roof Installation

7.1 Collector installation

Ensure the mounting brackets are level before securing, see

diagram 7.1.

Position the collector, protective side uppermost, on the

mounting bracket and beneath the clamp, see diagram 7.2.

NOTE: The design is symmetrical and does not have a top or

bottom.

IMPORTANT: Do not remove the protective lm until the

system is to be commissioned

Move the clamp into position ensuring the correct

engagement of both clamps onto the collector.

Secure the clamps.

Diagram 7.1

15177

Diagram 7.2

15178

STRAIGHT EDGE

COLLECTOR CLAMP (UPPER)

MOUNTING

BRACKET

MOUNTING BRACKET