Instruction Manual

14
7 On-Roof Installation
Insert the pipe couplings up to the limit stop into the
corresponding openings on the side of the collectors, see
diagram 7.3.
Secure the pipe coupling with the securing clip
Place the next collector on the lower mounting bracket. Slide
the collector up to the rst collector paying attention to the
pipe couplings, see diagram 7.4.
When fully inserted to the limit stops, ensure that the pipe
couplings are secured with the securing clips.
Diagram 7.3
15168
Diagram 7.4
15180
SECURING
CLIP
PIPE COUPLING
PIPE COUPLING
SECURING
CLIP