Manual

25
10.1 Safety data sheet
1 Substance/Formulation and company name
Information on the product:
Trade name of the Glow-worm solar uid (item no.
0020054968)
2 Composition/Information on components
Chemical properties
Watery solution of 1.2 propylene glycol with corrosion
inhibitors
3 Possible risks
No particular risks known
4 First-aid measures
General notes:
Remove dirty clothes.
After inhaling:
Discomfort after inhaling fumes/aerosol: fresh air, help from a
doctor.
After skin contact:
Wash off with water and soap.
After eye contact:
Wash thoroughly under running water with wide open eyes for
at least 15 minutes.
After swallowing:
Rinse your mouth and then drink plenty of water.
Notes for the doctor:
Treatment of symptoms (decontamination, vital function), no
specic antidote known.
5 Fireghting measures
Appropriate extinguishing agents:
Spray, solid extinguishing agent, alcohol-fast foam, carbon
dioxide (CO
2
)
Particular hazards:
Fumes which are detrimental to health. Formation of smoke/
mist. The specied substances/substance groups may be
released in the event of a re.
Special protective equipment for re ghting:
Wear a breathing apparatus which is independent of the
circulating air in the event of a re.
Further details:
The hazard depends on the combustible substances and
the re conditions. Polluted re water must be disposed of
according to local ofcial regulations.
6 Measures to be taken if substances are released
accidentally
Individual-related measures:
No particular measures required.
Environmental measures:
The product may not be discharged into waters without pre-
treatment (biological sewage plant).
Cleaning/Collection methods:
Pump out the product in the event of large quantities. Absorb
small quantities with appropriate uid bonding material.
Then dispose of them according to regulations. Rinse away
splashes with plenty of water. Inform the local water authority
in the event of large quantities which could ow into the
drainage or waters.
7 Handling and storage
Handling:
Good ventilation of the workplace, no other particular
measures required.
Fire and explosion protection:
No exceptional measures required. Cool any endangered
containers with water.
Storage:
Close containers tightly and store them at dry places. Do not
use any galvanised containers for storage.
8 Limitation of exposure and personal protective
equipment
Personal protective gear:
Hand protection: chemical-resistant protective gloves (EN
374). Suitable materials even in the event of prolonged, direct
contact (recommended: protection index 6, corresponding
to > 480 minutes permeation time according to EN 374):
our elastomer (FKM) – 0.7 mm layer thickness. Suitable
materials for brief contact or splashes (recommended: at least
protection index 2, corresponding to > 30 minutes permeation
time according to EN 374): nitrile rubber (NBR) – 0.4 mm
layer thickness. Due to the large variety of types, observe the
instruction manuals of the manufacturer.
Eye protection:
Safety glasses with lateral protection (framed glasses) (EN
166)
General safety and hygiene measures:
Observe the usual protective measures for dealing with
chemicals.
9 Physical and chemical properties
Form: uid
Colour: violet
Odour: product-specic
Solidication temperature: approx. -28 °C (DIN 51583)
Boiling temperature: > 100 °C (ASTM D 1120)
Flash point: none
Lower explosion limit: 2.6 % by vol. (details for
Upper explosion limit: 12.6 % by vol. 1.2 propylene glycol)
Ignition temperature: omitted
vapour pressure (20 °C): 20 mbar
Density (20 °C): approx. 1.030 g/cm3 (DIN 51757)
Water solubility: entirely soluble
Solubility (qualitative) solvent: polar solvents: soluble
pH value (20 °C): 9.0 – 10.5 (ASTM D 1287)
Viscosity, kinematic (20 °C): approx. 5.0 mm2/s (DIN 51562)
9 Solar Fluid Safety Data