Instruction Manual Rev. B from software version: v045 support@glp.de www.glp.
GLP German Light Products GmbH Contents 1 Description of Device ..................................................................................................... 3 2 Safety Instructions .......................................................................................................... 4 3 Preparation and Installation ............................................................................................ 6 3.1 Mounting .................................................................
GLP German Light Products GmbH 1 Description of Device 1. Moving head (actively and passively cooled) 2. Arm with various cooling vents 3. LCD-Display/Menu (data entry) 4. Base with various connectors and Camlock mounting system (see section 2.2 below) Base side view: 5. DMX Input (5 pin) 6. DMX Output (5 pin) 9 7. Power On/Off 8. Mains Input (powerCON) 9. Micro-fuse 5x20mm, T10A impression X4 L User Manual Rev.
GLP German Light Products GmbH 2 Safety Instructions The IMPRESSION X4 L is a High-Tech Product. To guarantee a smooth operation, it is necessary to respect the following rules. The manufacturer of this device will not take responsibility for damages through any disregard of the information provided in this manual. Warranty claims also will be voided in the case that the fixture housing is opened. Never look directly into the beam of light or into one of the LEDs.
GLP German Light Products GmbH Important Safety Information The IMPRESSION X4 L fixture from GLP is fitted with a number of plano-convex lenses in a highly efficient collimator cluster. This type of lens can act as a strong magnifying glass. If the rays from a strong light source (such as the sun or another lighting fixture) are directed towards the front of any of these fixtures, then internal damage may occur.
GLP German Light Products GmbH Should you have any questions about the operation of your fixture then please contact your local GLP office, or their authorized distributor, a list of which can be found at www.glp.de. 3 Preparation and Installation 3.1 Mounting The IMPRESSION X4 L is fully operational whether it hangs or is mounted to the wall. It can also be operated while standing on the floor. Keep a safety distance of min. 0.5 m towards any easily inflammable materials (decoration etc.).
GLP German Light Products GmbH For the various mounting positions of the IMPRESSION X4 L (standing on the floor, sideways or hanging) different accessories kits are available. Through this a safe and firm installation is assured. You'll find dedicated connectors on the bottom side of the fixture which should be used. In addition the base is marked with a FRONT arrow allowing consistent orientation during installation. Base plate view: 4 x Camlock quick release fasteners 2 x M10 length max.16mm 3.1.
GLP German Light Products GmbH 3.1.2 Mounting in hanging position (head down): To operate the IMPRESSION X4 L in a hanging position two (2) omega brackets can be mounted directly to the bottom of the base using the four (4) Camlock connectors. Alternatively two (2) half-couplers (clamps or hooks) can be mounted directly to the bottom side of the fixture using the two (2) M10x16 mm thread bolts. Attention: Never use a longer bolt as this may damage the interior of the fixture.
GLP German Light Products GmbH 3.2 Securing the Fixture Regardless of the mounting method of the IMPRESSION X4 L you'll have to use a stipulated safety wire. Attach the safety wire through one of the two holes provided on the base of the fixture and connect it to the primary support structure. Pay attention to a safe and proper fastening. The safety cable must comply with EN 60598-2-17 Section 17.6.
GLP German Light Products GmbH 4 The Menu Field You’ll find the control board on the side part of the arm. It allows you to make all necessary adjustments of the IMPRESSION X4 L. With the Mode-key you get into the main menu. Afterwards you can navigate through the menu with the Up/Down-keys. Push the Enterkey to get in the next menu level or to confirm your settings. Make them and set functions ON/OFF with the Up/Down-keys. Confirm and save it with the Enter-key (the display shows OK).
GLP German Light Products GmbH 5 DMX Chanel Selection (DMX Protocol) 5.1 Normal Mode (norm) 29 DMX channels: Channel Function Time and Value DMX 1 Pan - High Pan coarse 0° - 608° 0..255 2 Pan - Low Pan fine 3 Tilt - High Tilt coarse 4 Tilt - Low Tilt fine 5 Color (fixed) Colors adjustable via RGB 0..7 Color 01 - Red 1) 8..15 0..255 0° - 243° 0..255 Color 02 - Amber 1) 16..23 Color 03 - Warm Yellow 1) Color 04 - Yellow 24..31 1) 32..
GLP German Light Products GmbH 11 Intensity Intensity 12 CTO No CTO 13 Special 0 - 100% 0..255 0..7 Continuous color temperature correction Applicable 2,500k – 10,000k for ALL colors 8..255 Pattern Block 1 0..3 Pattern Block 2 4..7 Pattern Block 3 8..11 Pattern Block 4 12..15 Pattern Block 5 16..19 Pattern Block 6 20..23 Pattern Block 7 24..27 Pattern Block 8 28..31 Pattern Block 9 32..35 Pattern Block 10 26..39 Switch Pattern to Animation 80..
GLP German Light Products GmbH 15 Pan / Tilt Speed Circle (inverse) size / phase see Pan 160..191 Lying eight size / phase see Pan 192..223 Random movement size / phase see Pan 224..255 Pan/Tilt movement speed from controller 0..1 Pan/Tilt, slow – fast 2..255 Use this channel for the speed of the macros on channel 14 16 Zoom Wide (flood) - narrow (spot) 17 Pattern No Pattern 50° - 7° 0..255 0 255 pre-defined patterns 1..
GLP German Light Products GmbH Pan inverted / Tilt inverted 120° 52..53 Pan inverted / Tilt inverted 180° 54..55 Pan inverted / Tilt inverted 240° 56..57 Pan inverted / Tilt inverted 300° 58..59 28 Pattern Effect No effect 0..1 crossfade 29 02..15 random flash white slow – fast 16..31 random color slow – fast 32..47 random color background only slow – fast 48..63 0° - 540° 0..255 Beam Shaper Beam Shaper position (optional) impression X4 L User Manual Rev.
GLP German Light Products GmbH 5.2 Compressed Mode (comp) 21 DMX Channels: Channel Function Time and Value DMX 1 Pan - High Pan coarse 0° - 608° 0..255 2 Pan - Low Pan fine 3 Tilt - High Tilt coarse 4 Tilt - Low Tilt fine 5 Color (fixed) Colors adjustable via RGB Color 01 - Red 0..255 0° - 243° 0..255 0..255 0..7 1) 8..15 Color 02 - Amber 1) 16..23 Color 03 - Warm Yellow 1) 24..31 Color 04 - Yellow 1) 32..39 1) 40..
GLP German Light Products GmbH 12 CTO 13 Special No CTO 0..7 Continuous color temperature correction Applicable 2,500k – 10,000k for ALL colors 8..255 Pattern Block 1 0..3 Pattern Block 2 4..7 Pattern Block 3 8..11 Pattern Block 4 12..15 Pattern Block 5 16..19 Pattern Block 6 20..23 Pattern Block 7 24..27 Pattern Block 8 28..31 Pattern Block 9 32..35 Pattern Block 10 Switch Pattern to Animation Set Zoom normal Set Zoom inverted RESET > 1 sec > 1 sec > 1 sec 26..39 80..83 216.
GLP German Light Products GmbH Pan inverted / Tilt inverted Pan inverted / Tilt inverted Pan inverted / Tilt inverted 20 Pattern Effect No effect crossfade random flash white random color random color background only 21 Beam Shaper Beam Shaper position (optional) impression X4 L User Manual Rev. B 180° 240° 300° slow – fast slow – fast slow – fast 0° - 540° from software version: v045 54..55 56..57 58..59 0..1 02..15 16..31 32..47 48..63 0..
GLP German Light Products GmbH 5.3 Extended Mode (high) 31 DMX Channels: Channel Function Time and Value DMX 1 Pan - High Pan coarse 0° - 608° 0..255 2 Pan - Low Pan fine 3 Tilt - High Tilt coarse 4 Tilt - Low Tilt fine 5 Red - High Color mixing system - Red - high 0 - 100% 0..255 6 Red - Low Color mixing system - Red - low 0 - 100% 0..255 7 Green - High Color mixing system - Green - high 0 - 100% 0..255 8 Green - Low Color mixing system - Green - low 0 - 100% 0..
GLP German Light Products GmbH 19 Pattern No Pattern 255 pre-defined patterns 255 pre-defined animations (only if Channel 13 is set to 80..83) 0 1..255 1..255 20 Intensity Front Intensity foreground layer 0 - 100% 0..255 21 Intensity Back Intensity background layer 0 - 100% 0..255 22 Back Red Color mixing system - Background Red 0 - 100% 0..255 23 Back Blue Color mixing system - Background Green 4) 0 - 100% 0..255 24 Back Green Color mixing system - Background Blue 4) 0 - 100% 0..
GLP German Light Products GmbH 5.4 Single Pixel Mode (spix) 169 DMX Channels: Channel Function Time and Value DMX 0° - 608° 0..255 1 Pan - High Pan coarse 2 Pan - Low Pan fine 3 Tilt - High Tilt coarse 4 Tilt - Low Tilt fine 5 Color (fixed) Colors adjustable via RGB 0..7 Color 01 - Red 1) 8..15 0..255 0° - 243° 0..255 Color 02 - Amber 1) 16..23 Color 03 - Warm Yellow 1) Color 04 - Yellow 24..31 1) 32..39 Color 05 - Green 1) Color 06 - Turquoise 40..47 1) 48..
GLP German Light Products GmbH 12 CTO 13 Special No CTO 0..7 Continuous color temperature correction Applicable 2,500k – 10,000k for ALL colors 8..255 Pattern Block 1 0..3 Pattern Block 2 4..7 Pattern Block 3 8..11 Pattern Block 4 12..15 Pattern Block 5 16..19 Pattern Block 6 20..23 Pattern Block 7 24..27 Pattern Block 8 28..31 Pattern Block 9 32..35 Pattern Block 10 26..39 Switch Pattern to Animation 80..83 Set Zoom normal > 1 sec 216..
GLP German Light Products GmbH 20 Pattern Effect Pan inverted / Tilt normal 180° 38..39 Pan inverted / Tilt normal 240° 40..41 Pan inverted / Tilt normal 300° 42..43 Pan inverted / Tilt inverted 0° 48..49 Pan inverted / Tilt inverted 60° 50..51 Pan inverted / Tilt inverted 120° 52..53 Pan inverted / Tilt inverted 180° 54..55 Pan inverted / Tilt inverted 240° 56..57 Pan inverted / Tilt inverted 300° 58..59 No effect 0..1 crossfade 02..15 random flash white slow – fast 16.
GLP German Light Products GmbH 45 Pixel 6 White Color mixing system - White 0 - 100% 0..255 46 Pixel 7 Red Color mixing system - Red 0 - 100% 0..255 47 Pixel 7 Green Color mixing system - Green 0 - 100% 0..255 48 Pixel 7 Blue Color mixing system - Blue 0 - 100% 0..255 49 Pixel 7 White Color mixing system - White 0 - 100% 0..255 50 Pixel 8 Red Color mixing system - Red 0 - 100% 0..255 51 Pixel 8 Green Color mixing system - Green 0 - 100% 0..
GLP German Light Products GmbH 83 Pixel 16 Green Color mixing system - Green 0 - 100% 0..255 84 Pixel 16 Blue Color mixing system - Blue 0 - 100% 0..255 85 Pixel 16 White Color mixing system - White 0 - 100% 0..255 86 Pixel 17 Red Color mixing system - Red 0 - 100% 0..255 87 Pixel 17 Green Color mixing system - Green 0 - 100% 0..255 88 Pixel 17 Blue Color mixing system - Blue 0 - 100% 0..255 89 Pixel 17 White Color mixing system - White 0 - 100% 0..
GLP German Light Products GmbH 121 Pixel 25 White Color mixing system - White 0 - 100% 0..255 122 Pixel 26 Red Color mixing system - Red 0 - 100% 0..255 123 Pixel 26 Green Color mixing system - Green 0 - 100% 0..255 124 Pixel 26 Blue Color mixing system - Blue 0 - 100% 0..255 125 Pixel 26 White Color mixing system - White 0 - 100% 0..255 126 Pixel 27 Red Color mixing system - Red 0 - 100% 0..255 127 Pixel 27 Green Color mixing system - Green 0 - 100% 0..
GLP German Light Products GmbH 159 Pixel 35 Green Color mixing system - Green 0 - 100% 0..255 160 Pixel 35 Blue Color mixing system - Blue 0 - 100% 0..255 161 Pixel 35 White Color mixing system - White 0 - 100% 0..255 162 Pixel 36 Red Color mixing system - Red 0 - 100% 0..255 163 Pixel 36 Green Color mixing system - Green 0 - 100% 0..255 164 Pixel 36 Blue Color mixing system - Blue 0 - 100% 0..255 165 Pixel 36 White Color mixing system - White 0 - 100% 0..
GLP German Light Products GmbH 1) The predefined colors can be used as start-colors for the Rainbow effect. Please select first a desired start-color before you activate the rainbow effect. All IMPRESSION X4 L will then start from that color and will execute the rainbow effect synchronously. Different IMPRESSION X4 L can have different start-colors but will still execute the rainbow effect synchronously.
GLP German Light Products GmbH 6 Accessories 6.1 Optional Beam-Shaper: The IMPRESSION X4 L can be equipped with an optional beam-shaper. Please contact your local GLP dealer for further information about this accessory part. To install the beam-shaper lens please locate the little cutout (see 1 below) and twist the lens carefully until the latch (see 2 below) locks in. To remove the lens again simply pull the latch and twist the beam-shaper lens until you can lift it out of the fixture.
GLP German Light Products GmbH 7 Maintaining and Cleaning The IMPRESSION X4 L is a fixture of very low maintenance. It is only necessary to clean the air inlets and outlets as well as the optical LED lenses from time to time. For safe operation it is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build up on, or within the fixture. Otherwise the fixture's light-output will be significantly reduced or damages can occur.
GLP German Light Products GmbH 8 Technical Specifications: Power supply Power consumption 900 VA (Watt) Power Input Auto sensing 100-240 V AC, 50-60 Hz Fuse protection Micro-fuse 5x20 mm, T10A Operational Parameters Max.
GLP German Light Products GmbH 9 Dimensions impression X4 L User Manual Rev.
GLP German Light Products GmbH impression X4 L User Manual Rev.
