MSDS

SAFETY DATA SHEET
Page 1 of 5
DATE OF PREPARATION: INFORMATION TELEPHONE NUMBER: 888-688-7131
January 26, 2015 EMERGENCY TELEPHONE NUMBERS: 888-688-7131
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION
Product Name: Repositionable Glue Dots Dispenser
Product Use: Hot Melt Pressure Sensitive Adhesive
Company Name Glue Dots
Company Address N117 W18711 Fulton Drive Germantown, WI. 53022
SECTION 2 - HAZARDOUS IDENTIFICATION
APPEARANCE: Characteristic Color
PRODUCT CLASS: Hot Melt Adhesive
ROUTES OF ENTRY: Eyes, Skin, Ingestion, and Inhalation
POTENTIAL HEALTH EFFECTS:
Eyes: Flush eyes gently with water
Skin: Wash with soap and water
Ingestion: Seek Medical Attention
Inhalation: Move individual to fresh air, seek medical attention
ACUTE HEALTH HAZARDS: N/A
CHRONIC HEALTH HAZARDS: N/A
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None known
As defined in 29 CFR §1910.1200: NONE
SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS
Unlisted ingredients are not “hazardous” per the OSHA standard and/or not found on the WHMIS ingredient list.
Chemical/CAS# Percent OSHA PEL ACGIH TVL
SECTION 4 FIRST AID MEASURES
EYES: Immediately flush the eyeball and the inner surface of the eyelid with plenty of water. Do not attempt to
remove the hot melt.
SKIN: For molten product contact, immediately immerse or flush skin with large amounts of cold water to dissipate
heat. Do not attempt to remove the material from skin or to remove contaminated clothing as the damaged
flesh can be easily torn. Obtain medical attention promptly.
INGESTION: If person can swallow, give one glass of water or milk. Do not induce vomiting. Get immediate
medical attention. Never give anything by mouth to an unconscious person.
INHALATION: Remove to fresh air and get medical attention for symptoms of breathing problems.

Summary of content (5 pages)