User Manual

Unpacking Your BlackBox Pro
Your Glyph BlackBox Pro and accessories are packaged in a sturdy shipping container.
Please inspect the container for evidence of shipping damage and mishandling. If the
container is damaged, file a report with the carrier or dealer immediately. Do not attempt to
unpack and operate your BlackBox Pro until the carrier or dealer confirms the damage. If the
container is in good condition, proceed with unpacking BlackBox Pro. Verify that all the items
described in the next section are present and in good condition. If any of the items you expect
to find in your container are missing or damaged, contact the dealer before proceeding any
further. In any case, do keep the shipping container and all packing materials in a safe place.
BlackBox Pro package includes:
BlackBox Pro Enclosure with Silicone Protective Cover
Glyph USB-C (3.1 Gen2) to USB-C (3.1 Gen2) cable
Glyph USB-C (3.1 Gen2) to USB-3.0 cable (not compatible with USB 2.0)
International AC Adapter
Use the included USB cable to connect BlackBox Pro to your computer. BlackBox Pro comes
pre-formatted for Mac and is ready for use out of the box. If you plan to use BlackBox Pro with
Microsoft Windows, please follow the instructions below for formatting with Windows
computers. To use BlackBox Pro with your computer, you need:
• A Mac or PC with a USB C, USB 3.0, or USB 2.0 port, and one of the following operating
systems:
• Mac OS X version 10.4 or later
• Windows 7 or later