Owner manual

AEC-7763LC/LD & ARS-2022/2022D

When copying is in progress, MB and time will decrease whereas the percentage of

completion will increase.

Chapter 5 Functions

There are 12 functions: Copy, Test, Test & Copy, Verify, Compare, Prescan, Disc

Info, Select Source, Image, Edit Track, Setup and Advanced Setup. Among the 12

functions, Edit Track is designed exclusively for editing a collection of favorite songs

from CDs. During operation if you do not understand an LCD message, you can see

Appendix 2.

5.1 Copy

Function 1 Copy is to copy data from a source DVD directly into a blank DVD disk.

Before copying be sure that the source DVD is placed onto DVD-ROM, or there are

data in a certain partition if you have installed a hard drive. If you are not so sure of

real copying, you can use Function 2 Test to simulate first.

Select function 1. Put a source DVD onto DVD-ROM and a blank DVD disk onto the

DVD writer. A DVD rewriteable disk containing old data is usable, too.

After the DVD-ROM and DVD writer detect DVDs, press ENT to start copying. LCD

will show the copying information as follows.

1.Copy

Copying- DVD 0%

4213.4MB 15:00