Owner manual

8
AEC-7763LC/LD & ARS-2022/2022D
When copying comes to an end, LCD will show the results as follows. The passed
DVD will eject automatically.
5.2 Test
Function 2 Test is to simulate the copying progress. When simulation finishes, there
will be no data really written into the DVD disk.
Select function 2. Put a source DVD onto DVD-ROM and a blank DVD disk onto the
DVD writer.
Press ENT to start simulation. If you use a DVD rewriteable disk that contains data,
the old data will be quickly erased before simulation as shown below.
1.Copy
OK: 01
2.Test
Erasing disc
LCD will show the testing information as follows.
Testing- DVD 0%
4213.4MB 15:00