Owner’s Manual
Table Of Contents
- 2004 GMC Yukon Denali/Yukon XL Denali Book TOC
- Seats and Restraint Systems
- Front Seats
- Rear Seats
- Safety Belts
- Safety Belts: They Are for Everyone
- Questions and Answers About Safety Belts
- How to Wear Safety Belts Properly
- Driver Position
- Safety Belt Use During Pregnancy
- Right Front Passenger Position
- Center Passenger Position
- Rear Seat Passengers
- Rear Safety Belt Comfort Guides for Children and Small Adults
- Safety Belt Extender
- Child Restraints
- Older Children
- Infants and Young Children
- Child Restraint Systems
- Where to Put the Restraint
- Top Strap
- Top Strap Anchor Location
- Lower Anchorages and Top Tethers for Children (LATCH System)
- Securing a Child Restraint Designed for the LATCH System (Rear)
- Securing a Child Restraint in a Rear Outside Seat Position
- Securing a Child Restraint in a Center Rear Seat Position
- Securing a Child Restraint in the Right Front Seat Position
- Air Bag Systems
- Restraint System Check
- Features and Controls
- Keys
- Doors and Locks
- Windows
- Theft-Deterrent Systems
- Starting and Operating Your Vehicle
- New Vehicle Break-In
- Ignition Positions
- Starting Your Engine
- Adjustable Throttle and Brake Pedal
- Engine Coolant Heater
- Automatic Transmission Operation
- All-Wheel Drive
- Parking Brake
- Shifting Into Park (P)
- Shifting Out of Park (P)
- Parking Over Things That Burn
- Engine Exhaust
- Running Your Engine While You Are Parked
- Mirrors
- OnStar® System
- HomeLink® Transmitter
- Storage Areas
- Sunroof
- Vehicle Personalization
- Instrument Panel
- Instrument Panel Overview
- Climate Controls
- Warning Lights, Gages and Indicators
- Warning Lights, Gages, and Indicators
- Instrument Panel Cluster
- Speedometer and Odometer
- Tachometer
- Safety Belt Reminder Light
- Air Bag Readiness Light
- Passenger Air Bag Status Indicator
- Charging System Light
- Voltmeter Gage
- Brake System Warning Light
- Anti-Lock Brake System Warning Light
- Traction Off Light
- Engine Coolant Temperature Gage
- Transmission Temperature Gage
- Tire Pressure Light
- Malfunction Indicator Lamp
- Oil Pressure Gage
- Security Light
- Cruise Control Light
- Tow/Haul Mode Light
- Fuel Gage
- Low Fuel Warning Light
- Driver Information Center (DIC)
- Audio System(s)
- Setting the Time
- Radio with Cassette and CD
- Navigation/Radio System
- Rear Seat Entertainment System
- Rear Seat Audio (RSA)
- CD Changer
- Theft-Deterrent Feature
- Audio Steering Wheel Controls
- DVD Distortion
- Radio Reception
- Care of Your Cassette Tape Player
- Care of Your CDs and DVDs
- Care of Your CD Changer
- Care of Your CD and DVD Player
- Cleaning the Video Screen
- Fixed Mast Antenna
- XM™ Satellite Radio Antenna System (48 Contiguous US States)
- Chime Level Adjustment
- Driving Your Vehicle
- Your Driving, the Road, and Your Vehicle
- Defensive Driving
- Drunken Driving
- Control of a Vehicle
- Braking
- Stabilitrak® System
- Steering
- Off-Road Recovery
- Passing
- Loss of Control
- Operating Your All-Wheel-Drive Vehicle Off Paved Roads
- Driving at Night
- Driving in Rain and on Wet Roads
- City Driving
- Freeway Driving
- Before Leaving on a Long Trip
- Highway Hypnosis
- Hill and Mountain Roads
- Winter Driving
- If You Are Stuck: In Sand, Mud, Ice or Snow
- Towing
- Your Driving, the Road, and Your Vehicle
- Service and Appearance Care
- Maintenance Schedule
- Maintenance Schedule
- Introduction
- Maintenance Requirements
- Your Vehicle and the Environment
- Using Your Maintenance Schedule
- Scheduled Maintenance
- Additional Required Services
- Maintenance Footnotes
- Owner Checks and Services
- At Each Fuel Fill
- At Least Once a Month
- At Least Once a Year
- Recommended Fluids and Lubricants
- Normal Maintenance Replacement Parts
- Maintenance Record
- Maintenance Schedule
- Customer Assistance and Information
- Index
Programming the HomeLink
®
Transmitter
Do not use the HomeLink
®
Transmitter with any garage
door opener that does not have the “stop and reverse”
feature. This includes any garage door opener model
manufactured before April 1, 1982. If you have a newer
garage door opener with rolling codes, please be
sure to follow steps 6 through 8 to complete the
programming of your HomeLink
®
Transmitter.
Read the instructions completely before attempting to
program the HomeLink
®
Transmitter. Because of the
steps involved, it may be helpful to have another person
available to assist you in programming the transmitter.
Keep the original transmitter for use in other vehicles as
well as for future HomeLink
®
programming. It is also
recommended that upon the sale of the vehicle, the
programmed HomeLink
®
buttons should be erased for
security purposes. Refer to “Erasing HomeLink
®
Buttons”
or, for assistance, contact HomeLink
®
on the internet at:
www.homelink.com or by calling 1-800-355-3515.
Be sure that people and objects are clear of the garage
door or gate operator you are programming. When
programming a garage door, it is advised to park outside
of the garage.
It is recommended that a new battery be installed in
your hand-held transmitter for quicker and more
accurate transmission of the radio frequency.
Your vehicle’s engine should be turned off while
programming the transmitter. Follow these steps to
program up to three channels:
1. Press and hold down the two outside buttons,
releasing only when the indicator light begins to
flash, after 20 seconds. Do not hold down the
buttons for longer than 30 seconds and do not
repeat this step to program a second and/or third
transmitter to the remaining two HomeLink
®
buttons.
2. Position the end of your hand-held transmitter about
1 to 3 inches (3 to 8 cm) away from the HomeLink
®
buttons while keeping the indicator light in view.
3. Simultaneously press and hold both the desired
button on HomeLink
®
and the hand-held transmitter
button. Do not release the buttons until Step 4
has been completed.
Some entry gates and garage door openers may
require you to substitute Step 3 with the procedure
noted in “Gate Operator and Canadian
Programming” later in this section.
4. The indicator light will flash slowly at first and then
rapidly after HomeLink
®
successfully receives the
frequency signal from the hand-held transmitter.
Release both buttons.
2-40