Owner’s Manual

Table Of Contents
Removing the Bench Seat
To remove the bench seat, do the following:
1. Open the liftgate.
2. Fold the seatback
forward onto the seat
cushion by using
the lever labeled 1.
The seat cannot
be removed unless the
seatback is folded.
3. To unlatch the rear of
the seat from the floor,
pull up on the release
lever labeled 2 at
the rear of the seat and
lift the rear of the
seat up from the floor.
4. Pull on the release
strap located in the
lower middle of the seat
to unlatch the seat from
the floor and pull the
seat out. Use one hand
to pull the release strap
and the other on the
handle to pull the
seat out.
5. While holding the rear of the seat up, roll the seat
out of the vehicle.
1-20