User Manual

4 n (Four-Wheel Low): This setting also engages the

front axle and delivers extra torque. It sends maximum

power to all four wheels. You might choose this setting if

you are driving off-road in deep sand, deep mud, and

climbing or descending steep hills.

{ CAUTION:

Shifting the transfer case to Neutral can cause the

vehicle to roll even if the transmission is in

P (Park). You or someone else could be seriously

injured. Be sure to set the parking brake before

placing the transfer case in Neutral. See Parking

Brake on page 2-33.

Neutral: Shift the vehicle’s transfer case to Neutral only

when towing the vehicle. See Recreational Vehicle

Towing on page 4-38 for more information.

An indicator light in the knob will show you which

position the transfer case is in. The indicator lights will

come on brieﬂy when you turn on the ignition and

one will stay on. If the lights do not come on, you should

take the vehicle to your dealer/retailer for service. An

indicator light will ﬂash while shifting the transfer case. It

will stay on when the shift is complete. If the transfer

case cannot make a requested shift, it will return to the

last chosen setting.

If the service Four-Wheel Drive Warning Light on the

instrument panel cluster stays on, you should take

the vehicle to your dealer/retailer for service. See

Service Four-Wheel Drive Warning Light on page 3-44

for further information.

Shifting Into Four-Wheel High or Automatic

Four-Wheel Drive

Turn the knob to Four-Wheel High or Automatic

Four-Wheel Drive. This can be done at any speed

unless you are shifting out of Four-Wheel Low. The

indicator light will ﬂash while shifting. It will remain on

when the shift is complete.

2-30