User Manual

Battery Replacement
To change the remote control batteries:
1. Remove the battery compartment door located on
the bottom of the remote control.
2. Replace the two batteries in the compartment.
Make sure that they are installed correctly, using
the diagram on the inside of the battery
compartment.
3. Close the battery door securely.
If the remote control is to be stored for a long period of
time, remove the batteries and keep them in a cool,
dry place.
Problem Recommended Action
No power. The ignition might
not be in ON/RUN or
ACC/ACCESSORY.
The parental control
button might have been
turned on. The power
indicator light flashes.
Disc will not play. The system might be off.
The parental control
button might have been
turned on. The power
indicator light flashes.
The system might be in
auxiliary mode.
The disc is upside down
or is not compatible.
The picture does not fill
the screen. There are
black borders on the
top and bottom or on
both sides or it looks
stretched out.
Check the display
mode settings in the
display menu.
3-106