Owner’s Manual
Table Of Contents
- 2011 GMC Yukon/Yukon XL Owner Manual BookTOC
- Introduction
- In Brief
- Instrument Panel
- Initial Drive Information
- Remote Keyless Entry (RKE) System
- Remote Vehicle Start
- Door Locks
- Liftgate
- Windows
- Seat Adjustment
- Memory Features
- Second Row Seats
- Third Row Seats
- Heated Seats
- Heated and Ventilated Seats
- Head Restraint Adjustment
- Safety Belts
- Sensing System for Passenger Airbag
- Mirror Adjustment
- Steering Wheel Adjustment
- Throttle and Brake Pedal Adjustment
- Interior Lighting
- Exterior Lighting
- Windshield Wiper/Washer
- Climate Controls
- Transmission
- Four-Wheel Drive
- Vehicle Features
- Performance and Maintenance
- Keys, Doors and Windows
- Seats and Restraints
- Head Restraints
- Front Seats
- Rear Seats
- Safety Belts
- Airbag System
- Where Are the Airbags?
- When Should an Airbag Inflate?
- What Makes an Airbag Inflate?
- How Does an Airbag Restrain?
- What Will You See After an Airbag Inflates?
- Passenger Sensing System
- Servicing the Airbag-Equipped Vehicle
- Adding Equipment to the Airbag-Equipped Vehicle
- Airbag System Check
- Replacing Airbag System Parts After a Crash
- Child Restraints
- Older Children
- Infants and Young Children
- Child Restraint Systems
- Where to Put the Restraint
- Lower Anchors and Tethers for Children (LATCH System)
- Replacing LATCH System Parts After a Crash
- Securing Child Restraints (Rear Seat Position)
- Securing Child Restraints (Center Front Seat Position)
- Securing Child Restraints (Right Front Seat Position)
- Storage
- Instruments and Controls
- Controls
- Warning Lights, Gauges, and Indicators
- Instrument Cluster
- Speedometer
- Odometer
- Trip Odometer
- Tachometer
- Fuel Gauge
- Engine Oil Pressure Gauge
- Engine Coolant Temperature Gauge
- Voltmeter Gauge
- Safety Belt Reminders
- Airbag Readiness Light
- Passenger Airbag Status Indicator
- Charging System Light
- Malfunction Indicator Lamp
- Brake System Warning Light
- Antilock Brake System (ABS) Warning Light
- Tow/Haul Mode Light
- StabiliTrak® Indicator Light
- Tire Pressure Light
- Engine Oil Pressure Light
- Low Fuel Warning Light
- Security Light
- High-Beam On Light
- Front Fog Lamp Light
- Cruise Control Light
- Information Displays
- Vehicle Messages
- Battery Voltage and Charging Messages
- Brake System Messages
- Door Ajar Messages
- Engine Cooling System Messages
- Engine Oil Messages
- Engine Power Messages
- Fuel System Messages
- Key and Lock Messages
- Lamp Messages
- Object Detection System Messages
- Ride Control System Messages
- Airbag System Messages
- Anti-Theft Alarm System Messages
- Tire Messages
- Transmission Messages
- Vehicle Reminder Messages
- Washer Fluid Messages
- Vehicle Personalization
- Universal Remote System
- Lighting
- Infotainment System
- Climate Controls
- Driving and Operating
- Vehicle Care
- General Information
- Vehicle Checks
- Doing Your Own Service Work
- Hood
- Engine Compartment Overview
- Engine Oil
- Engine Oil Life System
- Automatic Transmission Fluid
- Engine Air Cleaner/Filter
- Cooling System
- Engine Coolant
- Engine Overheating
- Overheated Engine Protection Operating Mode
- Engine Fan
- Power Steering Fluid
- Washer Fluid
- Brakes
- Brake Fluid
- Battery
- Four-Wheel Drive
- Front Axle
- Rear Axle
- Starter Switch Check
- Automatic Transmission Shift Lock Control Function Check
- Ignition Transmission Lock Check
- Park Brake and P (Park) Mechanism Check
- Wiper Blade Replacement
- Glass Replacement
- Headlamp Aiming
- Bulb Replacement
- Electrical System
- Wheels and Tires
- Tires
- Tire Sidewall Labeling
- Tire Designations
- Tire Terminology and Definitions
- Tire Pressure
- Tire Pressure Monitor System
- Tire Pressure Monitor Operation
- Tire Inspection
- Tire Rotation
- When It Is Time for New Tires
- Buying New Tires
- Different Size Tires and Wheels
- Uniform Tire Quality Grading
- Wheel Alignment and Tire Balance
- Wheel Replacement
- Tire Chains
- If a Tire Goes Flat
- Tire Changing
- Secondary Latch System
- Full-Size Spare Tire
- Jump Starting
- Towing
- Appearance Care
- Service and Maintenance
- Technical Data
- Customer Information
- Customer Information
- Customer Satisfaction Procedure
- Customer Assistance Offices
- Customer Assistance for Text Telephone (TTY) Users
- Online Owner Center
- GM Mobility Reimbursement Program
- Roadside Assistance Program
- Scheduling Service Appointments
- Courtesy Transportation Program
- Collision Damage Repair
- Service Publications Ordering Information
- Reporting Safety Defects
- Vehicle Data Recording and Privacy
- Customer Information
- Index
Black plate (7,1)
GMC Yukon/Yukon XL Owner Manual - 2011
Instruments and Controls 5-7
3. Press the set/reset button to
scroll through and select the
appropriate variance zone.
4. Press the trip/fuel button
until the vehicle heading,
for example, N for North, is
displayed in the DIC. Or, if the
vehicle does not have DIC
buttons, press and hold the
trip odometer reset stem for
two seconds to select the next
available variance zone. Repeat
this step until the appropriate
variance zone is displayed.
5. If calibration is necessary,
calibrate the compass. See
“Compass Calibration
Procedure” following.
Compass Calibration
The compass can be manually
calibrated. Only calibrate the
compass in a magnetically clean
and safe location, such as an
open parking lot, where driving the
vehicle in circles is not a danger.
It is suggested to calibrate away
from tall buildings, utility wires,
manhole covers, or other industrial
structures, if possible.
If CAL should ever appear in the
DIC display, the compass should be
calibrated.
If the DIC display does not show a
heading, for example, N for North,
or the heading does not change
after making turns, there may be a
strong magnetic field interfering with
the compass. Such interference
may be caused by a magnetic CB
or cell phone antenna mount, a
magnetic emergency light, magnetic
note pad holder, or any other
magnetic item. Turn off the vehicle,
move the magnetic item, then turn
on the vehicle and calibrate the
compass.
To calibrate the compass, use the
following procedure:
Compass Calibration Procedure
1. Before calibrating the compass,
make sure the compass zone
is set to the variance zone in
which the vehicle is located.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
such as window, sunroof,
climate controls, or seats during
the calibration procedure.
2. Press the vehicle information
button until PRESS
V TO
CALIBRATE COMPASS
displays. Or, if the vehicle
does not have DIC buttons,
press the trip odometer reset
stem until CALIBRATE
COMPASS displays.