Owner’s Manual

Black plate (6,1)
GMC Yukon/Yukon XL Owner Manual - 2011
7-6 Infotainment System
EQ (Equalization): Press this
button to choose bass and treble
equalization settings designed for
different types of music. Selecting
MANUAL or changing bass or
treble, returns the EQ to the manual
bass and treble settings.
Unique EQ settings can be saved
for each source.
If the radio has a Bose
®
audio
system, the EQ settings are either
MANUAL or TALK.
Adjusting the Speakers
(Balance/Fade)
BAL/FADE (Balance/Fade): To
adjust the balance or fade:
1. Press the
f knob until the
speaker control tabs display.
2. Highlight the desired speaker
control tab by doing one of the
following:
.
Pressing the f knob.
.
Press the softkey under the
desired tab.
3. Adjust the setting by doing one
of the following:
.
Turn the f knob clockwise
or counterclockwise.
.
Press the ¨ SEEK,
or
© SEEK button.
.
Press the \ FWD,
or
s REV button.
To quickly adjust all speaker and
tone controls to the middle position,
press the
f knob for more than
2 seconds.
If the Rear Seat Audio (RSA) is
turned on, the radio disables FADE
and mutes the rear speakers.
Radio Messages
Calibration Error: The audio
system has been calibrated
for the vehicle from the factory.
If Calibration Error displays, it
means that the radio has not been
configured properly for the vehicle
and it must be returned to your
dealer for service.
Locked or Loc: One of these
messages will display when the
TheftLock
®
system has locked up
the radio. Take the vehicle to your
dealer for service.
If any error occurs repeatedly or
if an error cannot be corrected,
contact your dealer.