Owner’s Manual

Table Of Contents
Black plate (37,1)
GMC Yukon/Yukon XL Owner Manual - 2011
Vehicle Care 10-37
Bulb Replacement
For the proper type of replacement
bulbs, see Replacement Bulbs on
page 1039.
For any bulbchanging procedure
not listed in this section, contact
your dealer.
Halogen Bulbs
{
WARNING
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.
Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps
If the vehicle is a Hybrid, see the
Hybrid Supplement for the bulb
changing procedure.
A. Stoplamp/Taillamp
B. Taillamp/Turn Signal Lamp
C. Back-up Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
(Manual) on page 210 or
Liftgate (Power) on page 211.
2. Remove the two screws from the
taillamp assembly.
3. Pull the taillamp assembly
rearward until you disengage
the inner pins on the taillamp
assembly from the vehicle.