Owner’s Manual

Black plate (73,1)
GMC Yukon/Yukon XL Owner Manual - 2012 - CRC - 11/8/11
Vehicle Care 10-73
G. Tire/Wheel Retainer
H. Spare Tire (Valve Stem
Pointed Down)
I. Hoist Shaft Access Hole
J. Hoist End of Extension Tool
K. Spare Tire Lock
1. Open the hoist shaft access
door (C) on the bumper to
access the spare tire lock (K).
2. To remove the spare tire
lock (K), insert the ignition key,
turn it clockwise and then pull it
straight out.
3. Assemble the two jack handle
extensions (D) and wheel
wrench (E), as shown.
4. Insert the open end of the
extension (J) through the hole in
the rear bumper (I) (hoist shaft
access hole).
Be sure the hoist end (J) of the
extension connects to the hoist
shaft. The ribbed square end of
the extension is used to lower
the spare tire.