Owner’s Manual

Black plate (40,1)
GMC Savana Owner Manual - 2013 - 2nd Edition - 9/25/12
5-40 Instruments and Controls
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V while
the desired setting is displayed on
the DIC.
REMOTE DOOR LOCK
This feature allows you to select the
type of feedback you will receive
when locking the vehicle with the
Remote Keyless Entry (RKE)
transmitter. You will not receive
feedback when locking the vehicle
with the RKE transmitter if the doors
are open. See Remote Keyless
Entry (RKE) System Operation on
page 2‑2 for more information.
Press
U until REMOTE DOOR
LOCK appears on the DIC display.
Press
V once to access the settings
for this feature. Then press
U to
scroll through the following settings:
OFF: There will be no feedback
when you press
Q on the RKE
transmitter.
LIGHTS ONLY: The exterior lamps
will flash when you press
Q on the
RKE transmitter.
HORN ONLY: The horn will sound
on the second press of
Q on the
RKE transmitter.
HORN & LIGHTS (default): The
exterior lamps will flash when you
press
Q on the RKE transmitter, and
the horn will sound when
Q is
pressed again within five seconds of
the previous command.
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V while
the desired setting is displayed on
the DIC.
REMOTE DOOR UNLOCK
This feature allows you to select the
type of feedback you will receive
when unlocking the vehicle with the
Remote Keyless Entry (RKE)
transmitter. You will not receive
feedback when unlocking the
vehicle with the RKE transmitter if
the doors are open. See Remote
Keyless Entry (RKE) System
Operation on page 2‑2 for more
information.
Press
U until REMOTE DOOR
UNLOCK appears on the DIC
display. Press
V once to access the
settings for this feature. Then press
U to scroll through the following
settings:
LIGHTS OFF: The exterior lamps
will not flash when you press
K on
the RKE transmitter.
LIGHTS ON (default): The exterior
lamps will flash when you press
K
on the RKE transmitter.
NO CHANGE: No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V while
the desired setting is displayed on
the DIC.